Vitek VTD-TTD30R2V Bruksanvisning
Vitek
Inte kategoriserad
VTD-TTD30R2V
Läs gratis den bruksanvisning för Vitek VTD-TTD30R2V (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 2.5 recensioner. Har du en fråga om Vitek VTD-TTD30R2V eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
VITEK
VITEK
FEATURES
• 1/3” 2.1 Megapixel Progressive Scan CMOS image sensor
• 2.1 MegaPixel Video Transmission over COAX cable at
distances of up to 1500’ using HD-TVI Technology*
• 2.8~12mm Varifocal Lens
• 30 Infrared LED’s with 100’ IR Range
• Digital Wide Dynamic Range (D-WDR)
• True Mechanical Day/Night function by ICR
• 3D-DNR Noise Reduction
• IP66 Weather Resistance
• 12VDC Operation
VTD-TTD30R2V
2.1 Megapixel Vandal Resistant
HD-TVI IR Dome Camera
2
Safety Precaution
CAUTION: TO REDUCE THE RISK OF ELECTICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
To prevent electrical shock and risk of fire hazards, do not expose this unit
to rain or moisture and only use specified power source..
Warning :
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
Caution :
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Main power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power interruptions, it is
recommended that the device be powered from an uninterruptible power supply
(UPS).
The symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electrical shock.
3
3
4
5
6
7
8
1
2
Components and Accessories
Overview
Camera
User Manual
Drill Template
Screws
Hex Wrench
Lower Dome
Lens
Video Cable
Power Cable
Focus
Zoom
Lock Screw
Mounting Base
1
2
3
4
5
6
7
8
Produktspecifikationer
| Varumärke: | Vitek |
| Kategori: | Inte kategoriserad |
| Modell: | VTD-TTD30R2V |
Behöver du hjälp?
Om du behöver hjälp med Vitek VTD-TTD30R2V ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Vitek Manualer
8 Oktober 2024
7 Oktober 2024
7 Oktober 2024
6 Oktober 2024
27 September 2024
24 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
Inte kategoriserad Manualer
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025