Vocopro BT-1 Bruksanvisning


Läs gratis den bruksanvisning för Vocopro BT-1 (2 sidor) i kategorin Karaoke system. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 11 recensioner. Har du en fråga om Vocopro BT-1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
BT-1 User’s Guide
BT-1
BLUETOOTH
MUSIC RECEIVER
LINE
OUT
VOL
Getting Connected (For BT-1L only)
Pairing
Installation (For BT-1 only)
1. When powered, the BT-1/L will automatically be discoverable in
pairing mode (indicated by the blinking LED).
2. Go to the Bluetooth settings on your Bluetooth device and pair
the device labeled VOCOPRO. This will cause the LED to remain lit
signaling a successful pairing.
NOTE: If you are prompted for a password, use: 0000.
3. Use the volume knob to adjust volume of bluetooth audio output.
4. Enjoy your music!
1. Connect the power supply to the BT-1L and a power outlet.
2. Using the supplied 1/8” to 1/8” audio cable, connect one end to the audio output on the
BT-1, connect the other end to your powered speaker or audio system.
3. Install the antenna by aligning it to the center of the antenna input and turn clockwise.
1. Remove the expansion port cover plate from your compatible host unit.
2. Find the 6-pin cable and connect its connector to the 6-pin connector on the back of the BT-1.
3. Slide the BT-1 into the port and secure with the screws.
4. Install the antenna by aligning it to the center of the antenna input and turn clockwise.
1
1
Antenna
Connector
4
2 3
32
Antenna
Connector
NOTE: Do not connect 6-pin
connector and 5V power
adapter simultaneously.


Produktspecifikationer

Varumärke: Vocopro
Kategori: Karaoke system
Modell: BT-1

Behöver du hjälp?

Om du behöver hjälp med Vocopro BT-1 ställ en fråga nedan och andra användare kommer att svara dig