Vogels PVA 4210 Bruksanvisning
Läs gratis den bruksanvisning för Vogels PVA 4210 (4 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 3 recensioner. Har du en fråga om Vogels PVA 4210 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4

D, Fr, NL, Es, It : www.vogels.com/professional
Manual PVA 4206, PVA 4210, PVA 4216
video conferencing loudspeaker Version 1.0
PVA 4206, PVA 4210, PVA 4216 video conferencing loudspeaker with RS 232/485
communication
The PVA 4206, PVA 4210, PVA 4216 loudspeaker is especially designed for video
conferencing. The built in amplifier has a RS 232/485 communication feature which makes
remote control and operation possible. This can be in combination with other video
conferencing equipment.
Made in The Netherlands
Vogel’s Products BV
NL 5628DB Eindhoven
www. vogels.com
Vogel’s Holding BV 2012 © all rights reserved.
Subject to printing errors and technical amendments .

Content
-1x PVA 4206 PVA 4210 PVA 4216 loudspeakerOR OR
-1x manual
-1x 18V – 2,22A power supply unit
-1x Stereo audio cable (cinch – jack3.5)
-4x Anti skid pads
Connecting PVA 4206, PVA 4210, PVA 4216
Only use the supplied power supply.
First connect the loudspeaker to the audio source with the supplied audio cable.
Then connect the 18V plug from the power supply.
Only then plug the power supply into a mains source.
M a n u a l o p e r a t i o n :
Switching on and volume up: turn volume knob right, clockwise.
Switching off and volume down: turn volume knob left, counter clockwise.
The amplifier will not switch on immediately after turning the volume knob, it will wait till the green LED
has flashed once. This is part of the power saving function.
When the amplifier is switched on the green and red LED will flash once. After that the green LED will
stay on.
When the amplifier is switched off, the green LED will flash every 3-4 seconds as stand-by indcation.
This is also the RS232/485 monitor moment.
R S 2 3 2 / R S 4 8 5 o p e r a t i o n :
When the amplifier is switched on (green LED on), it will scan the RS232 and RS485 ports on activity.
When the amplifier detects activity on one of the ports it will switch to this port. The other port will be
ignorded as long as power is on.
Scanning of the ports will be resumed only when the power is switched off and on again.
When the amplifier is RS232 / RS485 operated, the position of the volume knob will be ignored.
When the amplifier is switched off via the RS232 / RS485 ports is will scan these ports every 3-4
seconds on new activities.
RS232 / RS485 Protocol:
The amplifier is operated by readable ascii commands.
These commands can, as example, be send and viewed by a terminal emulation program.
oBaudrate: 9600
o8 Bits (8n1)
The operation is based on the Basic Control Structure (BCS) Protocol of AMX/Crestron/Extron/Neets.
18V DC power in

Supporting BCS commands:
BCS commands are used as much as possible, however for some functions there exist no BCS codes,
for these functions dedicated * commandos are used.
Command Command Response Protocol
Volume control COVA^^^T COVA^^^T BCS
Volume status request SOVAT SOVAT(^^^) BCS
Switch off COVMT COVMT BCS
Switch on COVUT COVUT BCS
Status request SOST SOST B15
Put amplifier in potentiometer
mode COPT COPT B15
^^^ Volume in dB (value -100 tot 0) 0 is maximum amplification.
At -100 the amplifier will be switched in stand-by.
When no value is set, value 0 will be used (attention this is max. volume)
Status replies:
Answer Meaning
Ok Everythinh working okay
E Amplifier IC is giving an error signal.
W Amplifier IC is giving a Warning signal.
EW Amplifier IC is giving both an Error and a Warning
signal.
Connections data connector:
Pin Number Pin 1 (Left) Pin2 Pin3 Pin4 Pin5 (Right)
Amplifier
function GND RS232 TX RS232 RX RS485 +
Non inverting RS485 –
Inverting
Function Host
(PC) GND Receive data Tansmit Data
SubD9
RS232 Pin 5 Pin 2 Pin 3 NVT NVT
SubD9
RS485 Pin 5 NVT NVT Pin 1 Pin 2
RS232 SubD 9 pinout (pin connector male/front view):
Produktspecifikationer
Varumärke: | Vogels |
Kategori: | högtalare |
Modell: | PVA 4210 |
Färg på produkten: | Black, White |
Vikt: | 120 g |
Bredd: | 102.9 mm |
Djup: | 65.2 mm |
Höjd: | 32.6 mm |
Förpackningens vikt: | 430 g |
Förpackningens bredd: | 150 mm |
Djuppackning: | 125 mm |
Förpackningshöjd: | 99 mm |
Snäll: | IP-beveiligingscamera |
Husmaterial: | Kunststof |
Blåtand: | Nee |
Minneskortets maximala kapacitet: | 256 GB |
Ljudformat som stöds: | MP3 |
Stemcodecs: | G.711alaw, G.711ulaw, G.722.1, G.726, MP2L2 |
Vormfaktor: | kubus |
Placeringsstöd: | Binnen |
Anslutningsteknik: | Bedraad |
Ethernet LAN: | Ja |
Monteringsmetod: | Plafond/muur |
Maximal upplösning: | 3840 x 2160 Pixels |
Totalt antal megapixlar: | 8 MP |
Videokomprimeringsformat: | H.264, H.264+, H.265, H.265+, M-JPEG |
Typ av strömkälla: | DC, PoE |
Strömutgång (volt): | 12 |
Minimal belysning: | 0 Lux |
Antal kameror: | 1 |
Integrerad minneskortläsare: | Ja |
Kompatibla minneskort: | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
Inbyggd hårddisk: | Nee |
Nattseende: | Ja |
LED-typ: | IR |
Infraröd våglängd: | 850 nm |
Fast brännvidd: | 4 mm |
Video rörelsedetektering: | Ja |
Antal Ethernet LAN (RJ-45)-portar: | 1 |
Inbyggda högtalare: | Ja |
Strömförbrukning (max): | 5.9 W |
Optisk sensorstorlek: | 1/2.8 " |
Bildsensortyp: | CMOS |
Kamerans slutartid: | 1/3 - 1/100000 s |
Inbyggd mikrofon: | Ja |
Brusreducering: | Ja |
Nätverksstandard: | IEEE 802.1x, IEEE 802.3af |
Antal användare: | 32 gebruiker(s) |
Förvaringstemperatur: | -10 - 40 °C |
Max 30 bilder per sekund: | 30 fps |
Nätverksprotokoll som stöds: | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, NTP, UPnP, SMTP, IGMP, QoS, 802.1X, IPv6, UDP, Bonjour, SSL/TLS, PPPoE, SNMP |
Webbaserad hantering: | Ja |
Förvaringsfuktighet: | 0 - 95 procent |
Återställningsknapp: | Ja |
Progressiv skanning: | Ja |
Ethernet-gränssnittstyp: | Fast Ethernet |
Quality of Service (QoS): | Ja |
Samplingshastighet: | 48 kHz |
Rotationsvinkel: | 360 ° |
Panoreringsintervall: | 0 - 360 ° |
Dag/nattläge: | Ja |
Antal linser: | 1 |
Maximalt antal bländare: | 2 |
Styr kamerapanorering: | Ja |
Kameralutningsfunktion: | Ja |
Antal sensorer: | 1 |
Videostreaming: | Ja |
Rörelsesensor: | Ja |
Night vision scope: | 10 m |
Infrarött (IR) termineringsfilter: | Ja |
Bakgrundsljuskompensation: | Ja |
Antal språk: | 33 |
Highlight Compensation (HLC): | Ja |
Bithastighetskontroll: | Constant Bit Rate (CBR)/Variable Bit Rate (VBR) |
Justering av bildkvalitet: | Brightness, Contrast, Mirror, Saturation, Sharpness |
Strömförbrukning (strömförsörjning via Ethernet (PoE)): | 6.9 W |
Wide Dynamic Range (WDR): | Ja |
Bitrate: | 32 Kbps - 16 Mbps |
Wifi: | Nee |
Drifttemperatur (TT): | -10 - 40 °C |
Relativ luftfuktighet i drift (VV): | 0 - 95 procent |
Tiltvinkelområde: | 0 - 90 ° |
Mask privat zon: | Ja |
Beteendeanalys: | Intrusion detection, Line crossing detection |
Spiegel: | Ja |
Rörelsesensorteknik: | Passieve infraroodsensor (PIR) |
Linsens betraktningsvinkel, horisontell: | 82.8 ° |
Brusreduceringsteknik: | 3D-ruisonderdrukking |
Betraktningsvinkellins, diagonal: | 98 ° |
Linsens betraktningsvinkel, vertikal: | 45.1 ° |
Detektionsavstånd: | 110.3 m |
Region of Interest Coding (ROI): | Ja |
Observationsavstånd: | 43.8 m |
Igenkänningsavstånd: | 22.1 m |
Identifieringsavstånd: | 11 m |
Behöver du hjälp?
Om du behöver hjälp med Vogels PVA 4210 ställ en fråga nedan och andra användare kommer att svara dig
högtalare Vogels Manualer
12 September 2024
8 Augusti 2024
31 Juli 2024
29 Juli 2024
högtalare Manualer
- RetroSound
- Acme Made
- SiriusXM
- Blackmore
- Skullcandy
- Vivanco
- Nokia
- Sangean
- Genius
- Potter
- Lanzar
- Axton
- Irradio
- Vivax
- Harley Benton
Nyaste högtalare Manualer
17 Juni 2025
16 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025