Voltcraft GT-6000 V2 Bruksanvisning
Voltcraft
Inte kategoriserad
GT-6000 V2
Läs gratis den bruksanvisning för Voltcraft GT-6000 V2 (35 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8 recensioner. Har du en fråga om Voltcraft GT-6000 V2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/35
Operating Instructions
Device tester GT-6000 v2
Item No. 2362387 Page 2 - 34
2
Table of contents
Page
1. Introduction .......................................................................................................................................................... 3
2. Explanation of symbols ........................................................................................................................................ 3
3. Intended use ........................................................................................................................................................ 4
4. Delivery contents .................................................................................................................................................5
5. Optional accessories ...........................................................................................................................................5
6. Transport and storage .........................................................................................................................................6
7. Safety instructions ...............................................................................................................................................6
8. Operation elements and connections ..................................................................................................................8
9. Carrying out Measurements ..............................................................................................................................13
a) Testing a mains power outlet ...................................................................................................................... 13
b) Testing devices of protection class 1 .......................................................................................................... 14
c) Testing devices of protection class 2 (insulated) and devices of protection class 3 (safety low voltage) ... 17
d) Lead test - testing of power / extensions cables, cable reels and multi-plugs ............................................ 19
e) Testing (passive and active) of three-phase devices .................................................................................. 22
f) Testing of RCDs ..........................................................................................................................................23
10. Memory function ...............................................................................................................................................26
a) Saving measurement data ...........................................................................................................................26
b) Retrieving measurements ............................................................................................................................26
c) Measurement data deleting ......................................................................................................................... 26
d) Transferring measurements data.................................................................................................................26
e) Software and driver installation ..................................................................................................................27
f) Setting the RTC (Real Time Clock) ............................................................................................................28
11. Maintenance ......................................................................................................................................................29
a) Cleaning ......................................................................................................................................................29
b) Calibration Interval ......................................................................................................................................29
c) Battery Replacement and Disposal .............................................................................................................29
d) Fuse Replacement / Product Disposal ........................................................................................................30
12. Technical data ............................................................................................................................................. ....... 31
3
1. Introduction
Dear customer,
Thank you for purchasing this product.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must observe these operating instructions!
These operating instructions are part of this product. They contain important notes on commissioning and
handling. Also consider this if you pass on the product to any third party. Therefore, retain these operating
instructions for reference!
If there are any technical questions, please contact: www.conrad.com/contact
2. Explanation of symbols
The lightning symbol is used if there is a danger to your health, e.g. from electric shock.
The exclamation mark in a triangle indicates important notes in these operating instructions that must be
observed strictly.
The “arrow” symbol indicates that special advice and notes on operation are provided.
Conformity symbol, the instrument complies with the valid directives. It complies with the EMC Directive
(2014/30/EU), Standards EN 61326-1 is fullled. It also complies with the Low Voltage Directive
(2014/35/EU), Standard EN 61010-1 is fullled.
This symbol indicates that device is intended for use in dry indoor areas only.
Protection class 1 (earthing contact)
Protection class 2 (double or reinforced insulation, protective insulation)
CAT I for measurements of circuits not directly connected to the mains. i.e. battery powered instruments.
CAT II for measurements performed on circuits directly connected to the low voltage installation (main voltage)
such as household appliances, portable tools and similar equipment.
Produktspecifikationer
| Varumärke: | Voltcraft |
| Kategori: | Inte kategoriserad |
| Modell: | GT-6000 V2 |
Behöver du hjälp?
Om du behöver hjälp med Voltcraft GT-6000 V2 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Voltcraft Manualer
1 April 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
Inte kategoriserad Manualer
- Kontakt Chemie
- COLBOR
- Bytecc
- Lansinoh
- MSW
- Rocketfish
- Laurastar
- AS Synthesizers
- Carrier
- Block & Block
- Singercon
- Brinno
- Staudte-Hirsch
- Cyber Acoustics
- Yamaha
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025