VTech CS6124-11 Bruksanvisning

VTech Telefon CS6124-11

Läs gratis den bruksanvisning för VTech CS6124-11 (2 sidor) i kategorin Telefon. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 6 recensioner. Har du en fråga om VTech CS6124-11 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Quick start guide (Canada version)
CS6124/CS6124-11/CS6124-2/
CS6124-21/CS6124-31
Introduction
This quick start guide provides you with the basic installation
instructions. A limited set of features are described in
abbreviated form.
Please refer to the online user’s manual for complete installation
Telephone base and charger installation
Install the telephone base and charger as shown below.
Use only the power adapters and batteries supplied with
this product.
Battery installation and charging
Install the battery as shown below. Once you have installed the
battery, you may be able to make and receive short calls. For best
performance, charge the handset battery continuously for at least
16 hours.
Enter the handset menu
Press when the phone is not in use.MENU
Press or until the screen displays the desired CID
feature menu.
Press to enter that menu.SELECT
To return to the previous menu, press .CANCEL
To return to idle mode, press and hold .CANCEL
Set date and time
Press when the handset is not in use.MENU
Scroll to then press Settings SELECT.
Scroll to then press Set date/time SELECT.
Use the dialing keys ( - ) to enter the current month, date and 0 9
year. Then press SELECT.
Use the dialing keys ( - ) to enter the hour and minute. Then 0 9
press or to select or .CID AM PM
Press to save.SELECT
1.
2.
3.
1.
2.
3.
4.
5.
6.
IMPORTANT!
Refer to the online user’s manual for a full set of installation and
operation instructions. For manual download or customer service,
visit our website at www.vtechcanada.com or call 1 (800) 267-7377.
Copyright © 2012 for VTECH TELECOMMUNICATIONS LTD.
All rights reserved. Printed in China.
96-008393-020-100
Set number of rings
You can set the answering system to answer an incoming call
after 2, 3, 4, 5 or 6 rings; or toll saver. If you choose toll saver,
the answering system answers a call after 2 rings when you
have new messages, or after 4 rings when you have no
new messages.
Press when the handset is not in use.MENU
Scroll to then press Answering sys SELECT.
Scroll to then press Ans sys setup SELECT.
Scroll to then press # of rings SELECT.
Press or to choose , , , , or CID 6 5 4 3 2 Toll saver and
then press to save.SELECT
Record your own announcement
You can use the preset announcement to answer calls, or replace it
with your own recorded announcement. The announcement can be
Press when the handset is not in use.MENU
Scroll to then press twice.Answering Sys SELECT
Press to record.7
After the handset announces,
“Record after the tone. Press 5
when you are done,
speak towards the handset microphone.
Press when done.5
Press to play the recorded announcement; or to record 2 7
again if desired. Press to delete the recorded announcement. 3
Press to stop the playback at any time.5
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
Telephone base
Telephone
line cord
Electrical outlet
(not controlled by
a wall switch)
Telephone wall jack
A DSL lter
(not included)
is required if
you have DSL
high-speed
Internet service
Telephone base
power adapter
Charger
Charger
adapter
3
Slide the battery
compartment cover towards
the center of the handset
until it clicks into place.
4
Charge the handset in the
telephone base or charger.
CHARGE light
remains on
when charging.
1
Plug the battery connector
securely into the socket.
2
Place the battery with the
wires inside the battery
compartment.

Produktspecifikationer

Varumärke: VTech
Kategori: Telefon
Modell: CS6124-11

Behöver du hjälp?

Om du behöver hjälp med VTech CS6124-11 ställ en fråga nedan och andra användare kommer att svara dig