Walrus Audio Meraki Bruksanvisning


Läs gratis den bruksanvisning för Walrus Audio Meraki (7 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 10.5 recensioner. Har du en fråga om Walrus Audio Meraki eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/7
Got questions or need a repair?
Email help@walrusaudio.com to talk with a real human about your Walrus gear!
This product comes with a limited lifetime warranty.
Click Here for more info.
You are about to experience the Meraki. Cozy up and immerse yourself in true stereo
analog delay with eight MN3005 chips to create warm, rich repeats capable of 1200ms
of delay time with parallel, ping-pong and series delay modes. Independently control the
delay times and modulation of the left and right channels to create syncopated repeats or
keep them locked in to the same timing for classic delay sounds.
C ONTROL S
Only use a 9 volt DC, Center Negative, 500mA to power the pedal.
The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
Daisy chain power supplies are not recommended.
Mix: Adjust the overall level of the repeats in both th
left and right channels. Full Wet/Dry Mix; 50/50 is ar
2 O’Clock. Note: This control adjusts the left and rig
simultaneously.
Feedback Left: Adjust the amount of repeats in the
channel, from a single repeat to full oscillation.
Feedback Right: Adjust the amount of repeats in the
channel, from a single repeat to full oscillation.
Mod (Mod Rate): Use to adjust the depth of modula
the repeats, creating a chorus/vibrato effect.
Hold the Bypass switch and use the Mod knob to ad
the mod rate.


Produktspecifikationer

Varumärke: Walrus Audio
Kategori: Inte kategoriserad
Modell: Meraki

Behöver du hjälp?

Om du behöver hjälp med Walrus Audio Meraki ställ en fråga nedan och andra användare kommer att svara dig