Warwick Gnome i Bruksanvisning

Warwick Inte kategoriserad Gnome i

Läs gratis den bruksanvisning för Warwick Gnome i (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 8 recensioner. Har du en fråga om Warwick Gnome i eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/5

MANUAL

Warwick Amplification Gnome Series

Bass Amplifier Heads

Gnome Gnome i Gnome i Pro· ·

War

Introduction

Thank you for purchasing a Warwick amplier - clear, dened bass sound, true power and a built-in USB audio interface on the Gnome Gnome i

and Gnome i Pro models - all packed in a super compact, lightweight design that will easily t in your pocket! The amp heads were Gnome

developed to oer transparent, crisp and noise-free performance combined with an ultra-portable, lightweight design in an aordable and

reliable amp for discerning musicians and for the seasoned professionals.

The Warwick Gnome i Gnome i Pro and oer an easy-to-use audio interface without any special driver or software requirements. The USB audio

interface allows you to connect your amp to a PC, MAC or compatible mobile device to record your playing or to process your signal using Gnome

digital audio software plug-ins.

Precautions / Safety Instructions

Power Supply

The Warwick Gnome is powered by an IEC power cable, which provides AC power to the unit. Connect the IEC power cable to provide power.

Improper line voltage can cause serious damage to the unit, always check the line voltage marking on the amplier before you connect the IEC

power cable. Unplug the unit when not in use or during electrical storms.

Connections

Always turn o power to all other equipment before connecting or disconnecting. This will help to prevent malfunction and damage to any of

the devices used.

Cleaning

Clean only with a soft, dry cloth.

Handling

Do not apply excessive force to the switches or controls. Do not block any ventilation openings. Install in accordance to the instructions. Do not let

paper, metal, dirt or other objects come into contact with the device or its connections. Take care not to drop the device and do not subject it to

shock or excessive pressure. The unit should be connected to a mains socket outlet with a protective earthing connection. Replace fuse with rated

value, never bridge defective fuses. Before changing fuse disconnect power cable from unit! To avoid deformation, discoloration, or other serious

damage, do not expose this unit to any of the following conditions:

• Direct sunlight

• Strong magnetic elds

• Excessively dusty or dirty environments

• Strong vibration or shock

• Heat sources

• Extreme temperature

• High humidity or moisture

War

1 2 3 5 6 7

Front Panel Description

1. Input Jack: Accepts 6.35 mm (/“) audio jacks for connecting active or passive basses. If you use eects pedals, connect the output

from the last unit in the signal chain here. We recommend using high quality instrument cables for best sonic performance and reliable

connection.

2. Signal LED: The LED will light up green when the instrument signal passes the preamp without any compression. Higher input levels and

gain settings will activate the built-in compressor / limiter to prevent clipping in the pre-amp stage. The LED will light up red to indicate

active compression. The compressor also tracks changes made to the EQ settings, therefore an increase in an EQ setting might require a

decrease in the Gain setting to maintain the same amount of compression.

3. Gain: Adjusts the input gain of the pre-amp stage.

4. 3-Band EQ: The active tone control EQ section provides up to +/- 15 dB cut or boost for each band. All controls set to center position

(12 o‘clock) will provide a at EQ, turning the knobs clockwise will boost the frequency band, turning the controls counterclockwise will

cut the frequency band.

5. Master: The master volume control sets the signal level for the power output stage and the speaker output on the back of the Gnome

amplier. Set Master completely counterclockwise before you turn on the amplier and increase the control slowly until you reach the

desired volume level. A built-in limiter will prevent power amplier clipping when maximum power is detected.

6. Power LED: GnomeThe LED will light up green when the is powered and turned on.

7. Headphone Jack: Accepts headphones with 6.35 mm (/“) audio jacks. Silent practicing is possible if you disconnect the speaker output

and input your headphones. Silent practicing without connected load will not cause any damage to the amplier.

Produktspecifikationer

Varumärke:	Warwick
Kategori:	Inte kategoriserad
Modell:	Gnome i
Färg på produkten:	Wit
Förpackningens vikt:	1910 g
Monteringsmetod:	Plafond
Förpackningsmått (BxDxH):	240 x 240 x 70 mm
Maximal viktkapacitet:	20 kg
Panelmonteringsgränssnitt:	100 x 100,200 x 200,300 x 300,400 x 400 mm
Kompatibilitet med monteringsgränssnitt (min):	100 x 100 mm
Kompatibilitet med monteringsgränssnitt (max):	400 x 400 mm
Antal skärmar som stöds:	1