Watson VM-198-B-HLE Bruksanvisning
Watson
Inte kategoriserad
VM-198-B-HLE
Läs gratis den bruksanvisning för Watson VM-198-B-HLE (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 10 recensioner. Har du en fråga om Watson VM-198-B-HLE eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Thank you for choosing Watson Pro
Please read this user manual carefully, and keep
it for reference before using the battery.
VM-168-HLE-RED
AM/VM-198-B-HLE
Buddy System
Li-ion Battery with LED
and 3-Stud or V-Mount
SAFETY INSTRUCTIONS
Make sure the battery is fully charged before use.
When not in use, remove the battery from its device. Some
electronic equipment will draw current even when the switch is off.
Do not short-circuit the terminals. This battery is protected with
an internal self-resetting fuse, but short circuits may still cause
severe damage to the battery.
Do not attempt to open the battery case under any circumstances.
Do not remove the battery from any equipment that is powered on.
Always power off your equipment before removing the battery.
Use the battery under proper environmental conditions: 14°F to
122°F (-10°C to 50°C) with a Relative Humidity (RH) less than 85%.
The battery may be warm during use or recharging. This is normal.
The battery should be charged up to 40% for storage longer than
one month, and should be charged every 6 months.
Keep the battery away from fire, heat, and high pressure.
Do not expose the battery to rain or moisture.
Do not drop the battery or subject it to strong shocks.
Keep this unit away from water and any flammable gases or liquids.
Clean the battery and terminals with only a clean, soft,
and dry cloth.
When operation time has noticeably decreased, the battery may
need to be replaced.
Keep this product away from children.
Store the battery in a cool, dry place.
IMPORTANT
You must connect both halves
of the buddy system battery in
order for it to be operational.
You can only connect the
halves of buddy system
batteries with matching
serial numbers.
After assembling the two
halves, the 100% battery
level LED will light up for
three seconds. Then, the
battery level will display the
current charge amount.
OVERVIEW
. Battery-level check button
. Battery-level LED meter
Shows remaining capacity of
the battery. When capacity
reaches less than 9%, the
bottom LED will flash.
Slide lock
. D-tap output
12 V, 10 A max
. USB output
Press the battery-level check
button to start charging or to
power your USB device.
1. Mounting interface: 3-stud
or V-mount
1
2
3
4
5
6
4
2
3
5
6
1
Produktspecifikationer
| Varumärke: | Watson |
| Kategori: | Inte kategoriserad |
| Modell: | VM-198-B-HLE |
Behöver du hjälp?
Om du behöver hjälp med Watson VM-198-B-HLE ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Watson Manualer
16 Februari 2025
6 Februari 2025
6 Februari 2025
6 Februari 2025
6 Februari 2025
6 Februari 2025
6 Februari 2025
6 Februari 2025
3 Februari 2025
3 Februari 2025
Inte kategoriserad Manualer
- Sharp
- Vixen
- XD-Design
- Shoprider
- Casablanca
- Imarflex
- Intex
- MedFolio
- Century
- Kingston Technology
- TV One
- Monitor Audio
- August
- Entes
- CTOUCH
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025