Waves CLA MixDown Bruksanvisning

Läs nedan 📖 manual på svenska för Waves CLA MixDown (24 sidor) i kategorin Programvara för ljud. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/24
CLAMixDown
UserGuide
CLA MixDown User Guide /
2
Waves CLA MixDown
Contents
Introduction ...................................................................................................................... 3
A Word from Chris Lord Alge ............................................................................................ 3
Getting Started ................................................................................................................. 4
Components and Interface ............................................................................................... 5
Mono Component ............................................................................................................................ 6
Stereo Component ............................................................................................................................ 7
Co ntrols and Indicators..................................................................................................... 8
Input Section ..................................................................................................................................... 8
Processor Controls ............................................................................................................................ 9
Main Meters ................................................................................................................................... 11
Output Section ................................................................................................................................ 12
WaveSystem Toolbar ...................................................................................................................... 12
CLA MixDown User Guide /
4
Getting Started
The CLA MixDown is simple and intuitive to use. can be on any buss, but it shines most brightly whenIt inserted inserted
between the buss master and the mix . That’s what we’ll do in this quick start guide master .
Here’s a roadmap for your first visit the pluginto :
1. the buss master This buss pre Insert the CLA MixDown component on . “feeds” the plugin. The insert is -fader, so
compression remains the same regardless of fader setting. If you’re using Pro Tools, do not insert CLA MixDown
on the master fader, because this insert is post fader. This can result in inconsistent compression as level -
changes.
2. Patch plugin the output to mix master.
3. ncrease level I the MixDown Input . You’ compression and drive. There are three input meters that help ll hear more
you know when the input signal is in the right zone.
a. Note the color of the Input Sensitivity LED. It should be yellow.
b. The points VU meter should read 0 dB at the program’s loudest . An exceptionally loud peak can reach
+2 dB or +3 dB.
c. Use the digital full-scale meter to ensure that the no digitalre are clips. This is indicated by the red Clip
Indicators above the meters.
4. Set the VU meters to the (Gain Reduction) view. To get started, use the control to achieve up to 3 dB of GR Glue
gain reduction. the amount of compression, which affects the “tightness” of the final mix. As you raiGlue adjusts se
the Glue setting, the mix becomes less dynamic. There are two CLA compressor types. Compare them and
decide which works best for this mix.
5. controls sounds Drive harmonic distortion: It like aggressively hitting an SSL mix buss. High settings increase grit
and drive ower settings tend to open up the dynamics. Begin with extreme settings so that you can really hear . L
the effect.
CLA MixDown User Guide /
5
6. overall compression Use the Bass fader to control the -of the mix. Since low frequency sounds have long
wavelength and compressions lots of energy, they can inhibit a compressor from closing. This results in greater ,
but it can choke the mix.
7. Adjust the Treble control to increase or decrease high frequency presence. -
8. Get in the habit of doing Turn individual processing sections on and off, and A/B monitoring comparisons.
bypass the entire plugin to understand what you’re doing to the mix.
9. the output parameters Use the MixDown input and output faders to compensate level as you adjust .
This quick start was about using CLA MixDown between the main buss and the aster buss. You can insert the plugin m
on other busses, but make sure that the insert is pre Just follow these steps, listen to what the plugin is doing, and -fader.
keep in mind what you want to accomplish.
Components and Interface
There are two CLA MixDown components:
Mono
Stereo
Mono components can be inserted on mono channels only; stereo components can be inserted on stereo channels only.
It’s relatively easy to choose the correct component.
The mono and stereo components are identical except for the number of channels.

Produktspecifikationer

Varumärke: Waves
Kategori: Programvara för ljud
Modell: CLA MixDown

Behöver du hjälp?

Om du behöver hjälp med Waves CLA MixDown ställ en fråga nedan och andra användare kommer att svara dig




Programvara för ljud Waves Manualer

Programvara för ljud Manualer

Nyaste Programvara för ljud Manualer