Wavtech Link750.1plus Bruksanvisning
Läs gratis den bruksanvisning för Wavtech Link750.1plus (8 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2 recensioner. Har du en fråga om Wavtech Link750.1plus eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8

1
•
DO NOT DRIVE WHILE DISTRACTED. Any function that requires your prolonged attention should not be
performed while driving. Always stop the vehicle in a safe location before performing any such function. Failure to
do so may result in an accident.
•
KEEP THE VOLUME AT MODERATE LEVELS WHILE DRIVING. E xcess volume levels can obscure sounds such as
emergenc y vehicle sirens or road warning signals and may result in an accident. Continuous exposure to high sound
pressure levels may cause permanent hearing loss. Use common sense and practice safe sound.
•
FOR USE WITH 12V NEGATIVE GROUND VEHICLE APPLICATIONS ONLY. Using this product other than in its
designed application may result in fire, injur y or product damage.
•
MAKE THE CORRECT WIRING CONNECTIONS AND USE PROPER FUSE PROTECTION. Failure to connect wiring
correctly with appropriate gauge and fuse protection may result in fire, injur y or product damage . When replacing
fuse(s), never exceed the specified rating. Ensure proper protection of all system power wiring and install an
external fuse (not included) with specified rating for each amplifier connected with the +12V lead at the batter y
terminal.
•
DISCONNECT THE NEGATIVE BATTERY TERMINAL BEFORE INSTALLATION. Failure to do so may result in fire,
injur y or damage to the unit .
•
D O NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables to
prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as steering wheel,
brake pedals, etc . can be extremely hazardous.
•
DO NOT DAMAGE VEHICLE SYSTEMS OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis
for installation, take precautions so as not to contact , puncture or obstruct brake lines, fuel lines, fuel tanks,
electrical wiring, etc. Failure to take such precautions may result in fire or an accident .
•
DO NOT UTILIZE OR CONNECT TO ANY PART OF VEHICLE SAFETY SYSTEMS. Bolts, nuts or wires used in the
brake, airbag, steering or any other safety-related systems or fuel tanks should NEVER be used for mounting,
power or ground connections. Using such parts may disable control of the vehicle or result in fire.
WARNING
This symbol means impor tant instr uctions.
Failure to heed them can result in ser ious injur y or death.
CAUTION
•
STOP USE IMMEDIATELY IF A PROBLEM OCCURS. Failure to do so may result in personal injur y or damage to the
product. Return it to your authorized Wāvtech dealer.
•
HAVE AN EXPERT DO THE WIRING AND INSTALLATION. This unit requires special technical skill and experience
for wiring and installation. To insure safety and proper function, always contact the authorized dealer where you
purchased the product to have it done professionally.
•
INSTALL THE UNIT SECURELY WITH SPECIFIED PARTS. Be sure to use only the included parts and specified
installation accessories (not included). Use of other than designated parts may damage this unit . Install the unit
securely so that it will not come loose during a collision or sudden jolt.
•
ROUTE WIRING AWAY FROM SHARP EDGES AND MOVING PARTS. Arrange cables and wiring away from sharp
or pointed edges and avoid moving parts such as seat hinges or rails to prevent pinching or wear. Use loom
protection where appropriate and always use a grommet for any wiring routed through metal.
•
NEVER RUN SYSTEM WIRING OUTSIDE OR UNDERNEATH THE VEHICLE. All wiring must be routed, secured
and protected inside the vehicle. Failure to do so may result in fire, injur y or property damage.
•
INSTALL THE UNIT IN A DRY AND VENTILATED LOCATION. Avoid mounting locations where the unit will likely
be exposed to high moisture or heat without adequate ventilation. Moisture penetration or heat buildup may
result in product failure. Always make sure the amplifier chassis temperature is safe before touching it.
•
REDUCE GAIN AND SOURCE VOLUME TO MINIMUM LEVELS FOR INITIAL SYSTEM TUNING. Ensure amplifier
power is off before connecting signal cables and follow proper system gain setting procedures. Failure to do so
may result in damage to the amplifier and/or connected speakers.
Package Contents: Accessories Required for
Installation (not included):
WARNING
CAUTION
This symbol means impor tant instr uctions.
Failure to heed them can result in injur y or property damages.
Mounting Tabs
(pre-attached)
Spk Level
Input Terminal
Main Unit
Hex Wrenches
Ÿ RC A Cables or Signal Wire
Ÿ Power Supply & Speaker Wire
Ÿ In-line Fuse Holder w/ 0A Fuse 10
Ÿ Batter y Ring Terminal
Ÿ Chassis Ground Terminal
Ÿ Wire Crimp Connectors
Ÿ Grommets & Loom
Mounting Screws
link750.1plus
GAINCLIP
MIN MAX
5V/
20V
10V/
40V
SUBSONIC LPF
NAR
WIDE
BOOST WIDTH FREQ
(dB)
0
+12
+4 MED
(Hz)30 80
50
40
(Hz)5010
20
(Hz)50 500
100
60
2004070
35
Produktspecifikationer
Varumärke: | Wavtech |
Kategori: | mottagare |
Modell: | Link750.1plus |
Behöver du hjälp?
Om du behöver hjälp med Wavtech Link750.1plus ställ en fråga nedan och andra användare kommer att svara dig
mottagare Wavtech Manualer
12 Oktober 2025
10 Oktober 2025
9 Oktober 2025
14 Januari 2025
2 Januari 2025
15 September 2024
15 September 2024
mottagare Manualer
- Manley
- Ibanez
- Naim
- Kramer
- Cloud
- Fiio
- Formuler
- Astell&Kern
- Cisco
- Carlsbro
- Canton
- Bose
- Ram Audio
- Cayin
- Kenwood
Nyaste mottagare Manualer
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025