WHALE Orca Auto 1300 Bruksanvisning
WHALE
ej kategoriserat
Orca Auto 1300
Läs gratis den bruksanvisning för WHALE Orca Auto 1300 (32 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2.5 recensioner. Har du en fråga om WHALE Orca Auto 1300 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/32
INSTALLATION AND OPERATION MANUAL
Whale® Orca Auto 1300
* B suffix represents bulk item codes
Model Number Description
BE1482(B) Orca Auto 1300 - 12 V d.c.
BE1484(B) Orca Auto 1300 - 24 V d.c.
INSTALLATION AND OPERATION MANUAL
Whale® Orca Auto 1300
Thank you for purchasing this Whale® product. For over 40 years, Whale® has led the way in the
design and manufacture of freshwater and waste systems including: pumps, plumbing, faucets and
showers for low voltage applications. The company and its products have built a reputation for
quality, reliability and innovation backed up by excellent customer service. For information on our full
range of products visit www.whalepumps.com
IC - Intelligent Control Technology
At the heart of every Whale® IC product lies innovative electronic control circuitry built in. This
sensor technology is built into Orca Auto 1300 and means no separate bilge switch is required.
Orca Auto 1300
The Orca Auto 1300 is an automatic submersible bilge pump for use in marine vessels. Output
capacity depends on installation and operating conditions.
Read the following instructions carefully.
Check that the product is suitable for the intended application, follow these installation instructions
and ensure all relevant personnel read the points listed below. Also ensure that these operating
instructions are passed on to the end user.
Orca Auto 1300 is designed for installation in recreational marine vessels only and operated on 12V
d.c. (BE1482) or 24 V d.c. (BE1484) electrical supply only. If it is intended for use for any other
purpose or with any other liquid, it is the user's responsibility to ensure that the pump is suitable for
the intended use and, in particular, that the materials are fully compatible with the liquids to be used.
The Orca Auto 1300 is not recommended for domestic applications.
The Orca Auto is recommended to have a Duty Cycle of 60%
• NOTE The outlet must not be mounted below the water line.
• This pump is not suitable for pumping flammable liquids, diesel, chemicals
etc. Suitable for bilge water only.
• NOTE: Bilge pump capacities may not be sufficient to prevent flooding from
1. INSTALLATION & USER INSTRUCTIONS
2. SPECIFICATION
Product Code BE1482(B) BE1484(B)
Flow Capacity @ 13.6 V d.c. 1300 US GPH (82 ltrs/min)
Flow Capacity @ 1m head 1078 US GPH (68 ltrs/min)
Voltage 12 V d.c. 24 V d.c.
Recommended Fuse Size 7.5 Amp Automotive 5 Amp Automotive
Current Draw 5 Amps 2.5 Amps
Outlet Diameter 1” (25mm) / 1 1/8” (28mm)
Materials Pump body: ABS, Seals: Nitrile®, Impeller: Acetal
3. PRINCIPALS OF OPERATION
4. TO THE USER
5. TO THE FITTER
6. APPLICATION
ENG
7. WARNINGS
2
Produktspecifikationer
| Varumärke: | WHALE |
| Kategori: | ej kategoriserat |
| Modell: | Orca Auto 1300 |
Behöver du hjälp?
Om du behöver hjälp med WHALE Orca Auto 1300 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat WHALE Manualer
1 September 2025
ej kategoriserat Manualer
- Pyle
- Tru Components
- Kern
- Schallwerk
- Schleich
- Sencor
- Neve
- Eizo
- JOYROOM
- Navman
- Ikan
- Holzmann
- CYP
- Zoom
- Dedra
Nyaste ej kategoriserat Manualer
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025