Whirlpool W10623830 Bruksanvisning


Läs gratis den bruksanvisning för Whirlpool W10623830 (3 sidor) i kategorin Torktumlare. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3 recensioner. Har du en fråga om Whirlpool W10623830 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
Inlet Hose Connection Instructions for Steam Dryers
Instrucciones para la conexión de la manguera de entrada
para secadoras con vapor
Instructions de raccordement du tuyau d’arrivée d’eau pour
les sécheuses avec vapeur
TOOLS AND PARTS
Gather the required tools and parts before starting installation.
The dryer must be connected to the cold water faucet using the
new inlet hoses. Do not use old hoses.
Tools needed:
INSTALLATION REQUIREMENTS
2' (0.6 m) Inlet hose 5' (1.5 m) Inlet Hose
Rubber washer
Parts needed:
(Not supplied with dryer)
Pliers
W10631231 A
CONNECT INLET HOSES
1. Turn cold water faucet off and remove washer inlet hose.
2. Remove old rubber washer from inlet hose and replace
with new rubber washer provided. Inspect hoses to be sure
rubber washers are in place.
3. Attach short hose to cold water faucet. Screw on coupling
by hand until it is seated on faucet.
4. Using pliers, tighten the couplings with an additional
two-thirds turn.
NOTE: Do not overtighten. Damage to the coupling can
result.
5. Attach “Y” connector to the end of small hose. Screw on
coupling by hand until it is seated on connector.
6. Attach one of the long hose ends to the “Y” connector. Screw
on coupling by hand until it is seated on connector.
7. Attach washer cold inlet hose (A) to other end of “Y”
connector. Screw on coupling by hand until it is seated
on connector.
8. Using pliers, tighten the couplings an additional two-thirds
turn.
NOTE: Do not overtighten. Damage to the coupling can
result.
9.
back panel. Screw on coupling by hand until it is seated
10. Using pliers, tighten the couplings an additional two-thirds
turn.
NOTE: Do not overtighten. Damage to the coupling can
result.
11. Check that the water faucets are on.
12. Check for leaks around “Y” connector, faucet, and hoses.
“Y” connector
Parts Supplied:
Your installation may require
additional parts. To order,
please contact the dealer
from whom you purchased
your dryer or an authorized
service company.
A


Produktspecifikationer

Varumärke: Whirlpool
Kategori: Torktumlare
Modell: W10623830
Enhetsplacering: Ingebouwd
Typ av operation: Knoppen
Färg på produkten: Wit
Dörrgångjärn: Rechts
Inbyggd display: Ja
Vikt: 36700 g
Bredd: 560 mm
Djup: 550 mm
Höjd: 880 mm
Barnlås: Ja
Ljudnivå: 34 dB
Årlig-energiförbrukning: 65 kWu
Förpackningens vikt: 38900 g
Förpackningens bredd: 572 mm
Djuppackning: 633 mm
Förpackningshöjd: 931 mm
Energieffektivitetsklass (gammal): A+++
Dörröppningsriktning utbytbar: Ja
Lämplig för paneljustering: Ja
Kylskåpets nettokapacitet: 151 l
Kylskåp med bruttokapacitet: 159 l
Kylskåp invändig belysning: Ja
Typ av lampa: LED
Antal hyllor i kylskåp: 4
Äggställ: Ja
Flaskställ: Ja
Automatisk avfrostning (kylskåp): Ja
Installationsfackets bredd: 570 mm
Installationsfack djup: 550 mm
Installationsfack höjd: 890 mm
Hyllmaterial: Gehard glas
Supercool funktion: Ja
Larm för öppen dörr: Ja
Energianvändning per dag: 0.177 kWh/24u
Nuvarande: 1.2 A
Dörrpanel ingår: Nee
Klimaatklasse: SN-T
Genom montage: Deur-op-deur
Genomgående öppningsvinkel: 115 °
AC-ingångsspänning: 220 - 240 V
AC-ingångsfrekvens: 50 Hz
Type beeldscherm: LED

Behöver du hjälp?

Om du behöver hjälp med Whirlpool W10623830 ställ en fråga nedan och andra användare kommer att svara dig