Williams Sound CHG 520 Bruksanvisning


Läs gratis den bruksanvisning för Williams Sound CHG 520 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 7 recensioner. Har du en fråga om Williams Sound CHG 520 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
CHG 520
5-Unit Drop-In Battery Charger
USER MANUAL
CHG 520 Front and Rear View
Setup Instructions
1. Plug the DC power connector into the rear of the CHG 520.
2. Plug the power supply into an AC wall outlet.
3. Insert the Receiver into the charging slot. The receivers must be facing forward to make contact
with the charging contacts. The LED indicator on top of the IR RX20 receiver will illuminate red
4. It is safe to leave the receivers in the charger even after the batteries are fully charged. However,
we do not recommend leaving receivers in the charger for a prolonged period of time.
5. A piggy-back cable is available, which can be used to connect up to three CHG 520 chargers to
one power supply.
If No LED’s Light Up:
1. Verify that the power supply is plugged into a wall outlet.
2. Verify the wall outlet has power (no tripped circuit breaker, etc).
3. Verify the receiver is turned off.
4. Verify that all receivers are facing front in the charger. If charging, the indicator LED will illuminate
red. If fully charged, it should illuminate green.
Recycling Instructions
Help Williams AV protect the environment! Please take the time to dispose of your equipment
properly.
Please Recycle
Please do NOT dispose of your equipment in the household trash. Please take the equipment to
a electronics recycling center for proper disposal.
1


Produktspecifikationer

Varumärke: Williams Sound
Kategori: Inte kategoriserad
Modell: CHG 520

Behöver du hjälp?

Om du behöver hjälp med Williams Sound CHG 520 ställ en fråga nedan och andra användare kommer att svara dig