WilTec 51157 Bruksanvisning
Läs gratis den bruksanvisning för WilTec 51157 (5 sidor) i kategorin domkraft. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 1.5 recensioner. Har du en fråga om WilTec 51157 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
Operation Manual
Lawn Mower Jack
50800, 51157
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
https://www.XPOtool.com Item 50800, 51157 Page 2
The Tool Experts
08 2022-1
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to , mistakes cannot be entirely avoided.date
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
https://www.XPOtool.com Item 50800, 51157 Page 3
The Tool Experts
08 2022-1
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Attention! Before lifting an object, make sure you are fully aware on how the jack works. The
inadequate use can cause serious injury. All other uses than the ones outlined here can damage the
device and can be dangerous.
Safety requirements
• Only use the lawn mower jack for lifting.
• Do not allow children to use or play with the device.
• At no time leave the mower jack unattended and keep children and by-standers away.
• Never overcharge the mower jack. Overcharging may damage the mower jack and/or cause a
defect, resulting in serious injury.
• The mower lift is designed for a flat and hard ground. Using it on a soft surface can cause
instability, making the whole construct fall over.
• Always secure the load on the lateral reinforcement located on the side opposite the hand crank.
The load should always be placed horizontally on the mower jack avoid damage and sliding to
or falling of the load.
• Always visually check the jack before use, without any objects on it.
• Before lifting a ride- mower, make sure t the driver has left the seat.on tha
Use
Assembly before use
1. Position the jack on a flat and stable surface.
2. Expand the steel rod and secure it with three screws.
3. Install the handle and tighten it by screwing it on.
4. Remove the locking peg.
5. Place the crankshaft upwards.
6. For a better use we recommend to grease the shaft before use. This should be repeated when
required to ensure the smooth functioning of the parts.
Assembly during use
1. Remove the locking bracket to be able to lift the crankshaft into an upright position (1) (2).
2. Then place the locking bracket back into place, allowing the crankshaft to be sturdily positioned
upright (3).
3. Then turn the hand crank clockwise enabling for the lawn mower to be lifted (4).
Produktspecifikationer
| Varumärke: | WilTec |
| Kategori: | domkraft |
| Modell: | 51157 |
Behöver du hjälp?
Om du behöver hjälp med WilTec 51157 ställ en fråga nedan och andra användare kommer att svara dig
domkraft WilTec Manualer
17 Juli 2025
17 Juli 2025
domkraft Manualer
Nyaste domkraft Manualer
10 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
1 Juni 2025