Wooden Camera 152900 Bruksanvisning

Läs gratis den bruksanvisning för Wooden Camera 152900 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 9 recensioner. Har du en fråga om Wooden Camera 152900 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

A=Anton Bauer

B= Hyperdeck Shuttle

C= IDX/Swit

D= Odyssey 7 (NOTE: Install M2.5

locating socket cap on plate

prior to installing 1/4-20 screw)

HOLE CHART

Included:

(5) 1/4-20x3/8 socket button

(3) 1/4-20x5/8 socket button

(4) M3x12mm Phillips pan head ()Anton Bauer

(4) M3x10mm Phillips pan head ()Hyperdeck Shuttle

(4) M3x8mm Phillips pan head ()IDX/Swit

(1) M2.5x4mm socket cap screw ()Odyssey 7

SIDE PLATE (BMSC)

© Wooden Camera, Inc. 2011-2014

1. For single PLATE PLATE attachment, select and three

. 1/4-20x3/8 SCREWS

2. Select CAMERA1/4-20 HOLES, locate on right or left

side of and CAMERA BODYSIDE PLATE.

3. Align 1/4-20 HOLESCAMERA BODYSIDE on and

PLATE, select and tighten with 1/4-20x3/8 SCREWS

allen wrench.

SIDE PLATE

4. For multiple PLATE PLATES attachment, align to

as shown below, select and CAMERA BODY

tighten 1/4-20x5/8 SCREWS with allen wrench.

For attaching accessories find appropriate threaded holes by

using the below. Insert and tighten HOLE CHARTPHILLIPS

PAN HEAD SCREWS1/4-20 SCREWS or into corresponding

hole as shown on the on the next page.HOLE DIAGRAM

Produktspecifikationer