Worktrainer Y-Desk Bruksanvisning

Läs gratis den bruksanvisning för Worktrainer Y-Desk (31 sidor) i kategorin Byrå. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.1 stjärnor baserat på 7 recensioner. Har du en fråga om Worktrainer Y-Desk eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

7

Handset Instruction

Setting solution for desk function

Up & Down keyDisplay Screen

Memory Key

Up or Down Key

To adjust the height of the desk, keep pressing on "up" or "down" until it fits your best position.

Display screen

Display the height value of the desk.

Memory Key (M1/ M2/ M3/ M4)

Safety function

When the desktop is on the rise or down, encountered reverse resistance, the desk will rebound.

After setting memory keys, the desk can lift automatically to memory height.

How to set memory mode

The whole handset surface is a button panel. If there is no press within 30 seconds, the screen is locked and M1/M2/M3/M4

keys are locked correspondingly, you should press Up or Down key first, it can be used when the display screen light up.

Please keep pressing M1/M2/M3/M4 key for 5 seconds, until "be" sound, the memory height is successfully saved.

Then press M1/M2/M3/M4, the desk moves to memory height automatically.

Handset shows error code and solution

ER1

ER5

Error codeFault cause

Solution

Motor stop

Overload protection

Power offand restart. If fault still exists, it is motor problem.

Legs load>120kg, display ER5. Lighten loads, power offand restart.

Hot

Continuous operation for

2 to 5 minutes.

Power protection, automatic recovery after ten minutes

with power on.

(181220)

Sensitivity of downing

surface,all setting complete

A

anti collision

most sensitivity

1

general sensitivity

2

less sensitivity

3

4

anti collision OFF

most sensitivity

1

general sensitivity

2

less sensitivity

3

4

anti collision OFF

Press M3 BACK to the setting

surface, the data reserved

b

Cm or inch setting

cm

1

inch

2

Sensitivity of Upping

C

Using ︿ or ﹀ key to set basic height

Basic height setting

F

anti collision setting

d

Using ︿ or ﹀ to adjust the height

Minimum height setting

E

Using ︿ or ﹀ to adjust the height

Maximum height setting

Press M4 till hear

the second bee sound

（around 10s）.

use︿or﹀key to choose

A,b,C,d,E,F.

︿

﹀

︿

﹀

︿

﹀

︿

Press

M4

﹀

Press

M4

Press

M4

Press

M4

Press

M4

Press

M4

Press M3 BACK to the main

A2

series

ElectricHeight adjustabledesk frame

A2seriesusinginstruction

Rev:190404

Y-Desk Electric Height adjustable desk frame

Produktspecifikationer