Xsarius SG-3100 DiSEqC H-H Motor Bruksanvisning
Xsarius
Digital mottagare
SG-3100 DiSEqC H-H Motor
Läs gratis den bruksanvisning för Xsarius SG-3100 DiSEqC H-H Motor (12 sidor) i kategorin Digital mottagare. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 10 recensioner. Har du en fråga om Xsarius SG-3100 DiSEqC H-H Motor eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
Manual
High-end DiSEqC 1.2 satellite rotor
Xsarius SG-3100 DiSEqC H-H Mount
INSTALLING THE MOUNT
1.Assemble the H-H Mount as the following diagram.
2.Make sure the mounting tube indicates 0°.Otherwise, driver the mounting tube 2 to exact 0°
via the manual buttons on the bottom of the mount(the cable must be connected to the
receiver that is switched on).
3.Make sure the mounting pole is exactly vertical before installation.
4.Fix the H-H Mount onto the Mounting pole or stand and tighten the two U-screws 4 by the
clamp 6 and nut 5 evenly. Make sure there is no obstacle in the southern sky, such as a tree
or building.
1
ALIGNMENT OF THE MOUNT
1. Aiming TRUE SOUTH.
Attaching the Antenna Dish to the Mount. Make sure it is at the center of the mounting tube.
Rotate the mount together with the antenna toward TRUE SOUTH. You can nd the TRUE
SOUTH via the magnetic variation table and a compass that indicates the MAGNETIC
SOUTH.
2. Setting Elevation Angle.(A)
Adjust the motor elevation angle via the Inclinoneter or the Elevation / Latitude scale on both
sides of the Motor according to the Latitude of your position.
3. Setting Declination Angle.(B)
Find the Declination Angle by the attached ANGLE TABLE.
Set the Declination Angle by the scale on the antenna dish. The reading on the antenna scale
should be:
35°-DECLINATION ANGLE
4. Drive the antenna east and west via the manual buttons on the bottom of the Mount to check if
the reception arc is correct. If not , adjust the direction, elevation, and declination angle to nd the
best reception.
P.S. In order to have power to drive the antenna, please connect the Mount to the receiver or
interface box via coaxial cable rst.
2
Produktspecifikationer
| Varumärke: | Xsarius |
| Kategori: | Digital mottagare |
| Modell: | SG-3100 DiSEqC H-H Motor |
Behöver du hjälp?
Om du behöver hjälp med Xsarius SG-3100 DiSEqC H-H Motor ställ en fråga nedan och andra användare kommer att svara dig
Digital mottagare Xsarius Manualer
12 September 2024
24 Augusti 2024
22 Augusti 2024
Digital mottagare Manualer
- Entone
- Ten Haaft
- Dyon
- TechnoTrend
- Humax
- MKDigital
- Telenet
- Unity
- Amiko
- SetOne
- Opticum
- Technisat
- Kathrein
- Telestar
- Lorenzen
Nyaste Digital mottagare Manualer
15 Oktober 2024
20 September 2024
18 September 2024
17 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024