Yale PIR Image Camera Bruksanvisning
Läs gratis den bruksanvisning för Yale PIR Image Camera (2 sidor) i kategorin Säkerhet. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 8 recensioner. Har du en fråga om Yale PIR Image Camera eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Description:
1) Learn/Test Button with LED
Send test signal: hold and release within 3 secs.
This is used when checking accessory range
(See Smart Home Alarm user manual).
Send learn signal: hold for 10 secs+. Learn
button LED will flash when learn signal is sent.
2) Camera Flash
3) Camera
4) 2 x 1.5V AA Alkaline batteries
5) Cover tamper switch
Pack contents
• 1 x PIR Image Camera with batteries
• 4 x wall plugs & screws
Program your PIR before installation and test
afterwards. Please see your current Smart Home
Alarm user manual.
SPECIAL NOTE:
When inserting new batteries, the following are
disabled for 5 minutes.
• Tamper Switch
• Image will not be sent in the first 5 minutes
Please make sure you do not trigger the PIR
Video Camera for 5 minutes before testing the
system.
Compatible with Yale Smart Home Alarms
(SR-range) ONLY.
PIR Image Camera
(SR-PC)
smart
Living
3
2
1
4
5
Programming & Installation
For more information on this product
and Yale Smart Living Range visit
www.yale.co.uk/smart-living
Consumer Support: info@yale.co.uk
2
The 2 year guarantee for this
Yale Smart Home Alarm Kit is
active from the date of purchase
(A copy of this guarantee is
available on our website).
Sleep Timer
The PIR features an automatic “sleep time” of
approximately 1 minute for power conservation.
After transmitting a detected motion, the PIR will
not retransmit for 1 minute. Any further motion
detected within this one-minute sleep period will
extend the sleep time by another minute.
LED indicator
Off Normal operation
LED flash
(2 sec)
When motion is detected and the
LED flashes for 2 seconds, this
indicates one of the following:
• Low battery
• Tamper switch activated
• PIR in test mode
WARNING:
When you delete the PIR Video Camera from
the system, please ensure the PIR batteries are
removed to avoid unnecessary drain.
Environmental conditions:
-10oc to 40oc , relative humidity 85%
non-condensing. Indoor use only
Radio:
2.4GHz
Motion Detection Range:
110o
Specification
Operation
Note: Waste electrical products and batteries should not be disposed
of with household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Issue No. 1A
Information and illustrations are subject to change.
Yale reserves the right to alter the specification and
product design at any time without notice.
Produktspecifikationer
| Varumärke: | Yale |
| Kategori: | Säkerhet |
| Modell: | PIR Image Camera |
Behöver du hjälp?
Om du behöver hjälp med Yale PIR Image Camera ställ en fråga nedan och andra användare kommer att svara dig
Säkerhet Yale Manualer
13 September 2024
13 September 2024
13 September 2024
Säkerhet Manualer
- Jupiter Pro
- Doro
- Nedis
- Sygonix
- BRK DICON
- QuattSecure
- Kocom
- Somfy
- Trendnet
- NetBotz
- SmartHome
- Indexa
- Gira
- Mr Safe
- Provision ISR
Nyaste Säkerhet Manualer
19 Februari 2025
12 Januari 2025
7 Januari 2025
7 Januari 2025
24 Oktober 2024
22 Oktober 2024
21 Oktober 2024
20 Oktober 2024
20 Oktober 2024
Axis Camera Station S9001 Mk II Desktop Terminal Bruksanvisning
19 Oktober 2024