Yale PIR Video Camera Bruksanvisning

Yale övervakningskamera PIR Video Camera

Läs gratis den bruksanvisning för Yale PIR Video Camera (2 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 5 recensioner. Har du en fråga om Yale PIR Video Camera eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Description:

1) Learn/Test Button with LED

hold and release within 3 secs Send test signal:

This is used when checking accessory range

(See Smart Home Alarm user manual).

hold for 10 secs+. Learn Send learn signal:

button LED will ﬂash when learn signal is sent.

2) Camera Flash

3) Camera

4) 3 x AA Lithium batteries

5) Cover tamper switch

Pack contents

• 1 x PIR Video Camera with bracket

• 4 x wall plugs & screws

• 3 x AA Lithium batteries

Program your PIR before installation and test

afterwards. Please see your current Smart Home

Alarm user manual.

SPECIAL NOTE:

When inserting new batteries, the following are

disabled for 5 minutes.

• Tamper Switch

• Video will not be sent in the ﬁrst 5 minutes

Please make sure you do not trigger the PIR

Video Camera for 5 minutes before testing the

system.

Compatible with Yale Smart Home Alarms

(SR-range) ONLY.

PIR Video Camera

(SR-PVC)

smart

Living

Programming & Installation

For more information on this product

and Yale Smart Living Range visit

www.yale.co.uk/smart-living

Consumer Support: info@yale.co.uk

The 2 year guarantee for this

Yale Smart Home Alarm Kit is

active from the date of purchase

(A copy of this guarantee is

available on our website).

Sleep Timer

The PIR features an automatic “sleep time” of

approximately 1 minute for power conservation.

After transmitting a detected motion, the PIR will

not retransmit for 1 minute. Any further motion

detected within this one-minute sleep period will

extend the sleep time by another minute.

LED indicator

Off Normal operation

LED ﬂash

(2 sec)

When motion is detected and the

LED ﬂashes for 2 seconds, this

indicates one of the following:

• Low battery

• Tamper switch activated

• PIR in test mode

WARNING:

When you delete the PIR Video Camera from

the system, please ensure the PIR batteries are

removed to avoid unnecessary drain.

Environmental conditions:

-10oc to 40oc , relative humidity 85%

non-condensing. Indoor use only

Radio:

2.4GHz

Motion Detection Range:

110o

Note: Waste electrical products and batteries should not be disposed

of with household waste. Please recycle where facilities exist. Check

with your local authority or retailer for recycling advice.

Speciﬁcation

Operation

Issue No. 1A

Information and illustrations are subject to change.

Yale reserves the right to alter the speciﬁcation and

product design at any time without notice.

Produktspecifikationer

Varumärke:	Yale
Kategori:	övervakningskamera
Modell:	PIR Video Camera
Enhetsplacering:	Vrijstaand
Dörrgångjärn:	Rechts
Inbyggd display:	Ja
Vikt:	31000 g
Bredd:	480 mm
Djup:	605 mm
Höjd:	830 mm
Ljudnivå:	40 dB
Energie-efficiëntieklasse:	G
Årlig-energiförbrukning:	129 kWu
Förpackningens vikt:	34000 g
Förpackningens bredd:	518 mm
Djuppackning:	595 mm
Förpackningshöjd:	885 mm
Belysning inuti:	Ja
Total nettokapacitet:	112 l
Total bruttokapacitet:	115 l
Inbyggd frys:	Nee
Klimaatklasse:	N-ST
Bulleremissionsklass:	C
Färghandtag:	Roestvrijstaal
Husets-färg:	Zwart
Antal hyllor:	4 schappen
antal dörrar:	1 deur(en)
Invändig färg:	Zwart
Flaskkapacitet:	30 fles(sen)
Antal temperaturzoner:	1
Temperaturområde (zon 1):	5 - 22 °C
Typ produkt:	Compressorwijnkoeler
Energieffektivitetsskala:	A tot G