Yuneec Typhoon Wizard Bruksanvisning

Yuneec Leksaker Typhoon Wizard

Läs gratis den bruksanvisning för Yuneec Typhoon Wizard (1 sidor) i kategorin Leksaker. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 9 recensioner. Har du en fråga om Yuneec Typhoon Wizard eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

The Turn Le and Turn Right are disabled in this mode (Fly to the Le Direcon and Fly

to the Right Direcon can be controlled). The pilot will always be kept in the frame

wherever he/she moves.

NOTICE: In the Smart Mode, the geo-fence will keep the aircra from traveling further than

295  (90 m). The geo-fence is a virtual 'barrier'.

CAUTION: Any operaon related to camera control needs to be done on mobile APPs. The

APP can be downloaded from Google Play Store or APP Store. You can’t use the Wizard™

to take photos or record videos.

IMPORTANT NOTE: The ‘Point To Fly’ Funcon can only be acvated in Smart Mode.

USER MANUAL

INTRODUCTION

The TYPHOON Wizard™ is a mini GPS tracking device that gives you full one-handed ﬂight

control over the TYPHOON aircra. Features such as 'Follow Me' and 'Watch Me' ensure that

you are in frame in every shot. The ‘point to ﬂy’ funcon allows you to point and click to

reposion your TYPHOON in a very intuive way.

IMPORTANT NOTE: This Quick Start Guide is NOT intended to replace

the content included in the instrucon manual. You should read the instrucon manual

completely before proceeding.

NOTICE: Please ﬁnd a SD Card in the accessory box. There are tutorial video, electronic user

manual and show case in the SD Card.

TYPHOON WIZARD™ AND RECEIVER BINDING:

NOTICE: If it is your ﬁrst me to use the TYPHOON Wizard™ to control an aircra, please

bind the TYPHOON Wizard™ to your aircra.

Step 1) Tu rn on the aircra. Li its tail upwards approximately 45° then back down

to 'level' twice to put the aircra/receiver into binding mode.

FLIGHT CONTROLS

NOTICE: The safe distance between the TYPHOON Wizard™ and the aircra is 39  (12m).

The TYPHOON Wizard™ can be controlled in diﬀerent posions. Direcon Control Buons

funcon diﬀerently according to the posions of the Wizard™.

‘POINT TO FLY’ FUNCTION

Press and hold the Magic Buon on the TYPHOON Wizard™, and the aircra will ﬂy in the

direcon the TYPHOON Wizard™ is pointed to in the sky.

To Enter ‘Point To Fly’ Funcon

When the aircra is ﬂying, point the TYPHOON Wizard™ to a direcon, press and hold the

Magic Buon. Release the Magic Buon when Aircra Mode LED glows solid blue and

TYPHOON Wizard™ vibrates once. Then the aircra will ﬂy to the direcon the TYPHOON

Wizard™ points. The closer the TYPHOON Wizard™ is lted towards 0°, the further the

aircra will ﬂy away from the pilot. The closer the TYPHOON Wizard™ is lted towards 90°,

the closer the aircra will ﬂy to the pilot. When the Wizard™ is lted at 90°, the aircra will

ﬂy close to you straightly and stop at a safe distance.

NOTICE: The recommended ﬂying height is 33-66  (10-20 m). The operang distance

range of the TYPHOON Wizard™ is 33-164  (10-50 m). CAMERA CONTROLS

ANGLE MODE

When the Flight Mode Selecon Switch is in the middle posion the aircra will be in Angle Mode.

The Aircra Mode LED will be solid purple.

In this mode, the aircra will move in the direcon the TYPHOON Wizard™ is controlled

relave to the front/nose of the aircra. The aircra has no funcon of Follow Me or Watch Me.

NOTICE: In this mode, the ‘Point To Fly’ Funcon can't be acvated.

IMPORTANT NOTICE: In the Angle mode, the aircra is not suggested travelling further

than 656  (200 m). The Wizard™ will keep vibrang when the aircra travels further than

656  (200 m).

HOME MODE

When the Flight Mode Selecon Switch

is in the boom posion, the aircra will

be in the Home Mode. The Aircra Mode

LED will be solid red. To exit the Home

Mode, switch the Mode Switch to

Angle/Smart Mode, then the aircra will

stop moving and automacally hold its

posion (with a suitable GPS signal/lock)

and maintain a level atude then.

In Home Mode the aircra will ﬂy in a

straight line in the direcon of the pilots'

current locaon, and automacally land

within 13-26  (4-8 m) of the pilot.

2) When the TYPHOON

Wizard™ is lted upwards

between 0° and 40°, the

funcons of the Direcon

Control Buons are as

followed:

1) When the TYPHOON

Wizard™ is lted upwards

between 50° and 90°, the

funcons of the Direcon

Control Buons are as

followed:

NOTICE: When the aircra ﬂies to the le or right side, the nose of aircra doesn't change

its direcon when the TYPHOON Wizard™ is lted upwards between 0° and 40°.

To Exit ‘Point To Fly’ Funcon

When in the ‘Point To Fly’ Funcon, press any Direcon Control Buon to exit this

funcon. The aircra will stop moving and automacally hold its posion (with a suitable

GPS signal/lock) and maintain a level atude then.

NOTICE: The TYPHOON Wizard™ only needs to be bound to an aircra for the ﬁrst me. There

is no need to bind the Wizard™ to the same aircra when you use it again.

Step 2) Press and hold the Power Buon

ll the Aircra Mode LED glows solid

blue. Shake the TYPHOON Wizard™ up

and down ll hearing two beeps from the

aircra. Release the Power Buon.

Any camera control including photo taking or video recording should be operated on

Mobile Apps, which can be downloaded from Google Play Store or APP Store. The detailed

informaon can be referred to relevant User Manuals on the oﬃcial website: www.

yuneec.com

NOTICE: The control radius range of camera control is within 295  (90 m).

CAUTION: When using the Wizard™, if it keeps vibrang connuously, it indicates the

hardware in the Wizard™ malfuncon. Please send it to the oﬃcial service center for

maintenance.

NOTICE: In this mode, the ‘Point To Fly’ Funcon can’t be acvated.

WARNING: The maximun ﬂight speed of TYPHOON Q500 aircra is 3.14MPH (7m/s). If

the movement of the pilot is much faster than 3.14MPH (7m/s), the aircra may ﬂy away.

IMPORTANT NOTE: ‘Fly away’ is NOT covered under warranty.

CAUTION: Don’t switch to Home Mode when you are near bodies of water.

2) Follow Me Funcon Under Smart Mode

The Follow Me funcon allows the aircra to

follow the pilot, adjusng its locaon to the

locaon of the TYPHOON Wizard™. All

buons are controllable in this mode. When

in Follow Me funcon, the aircra will follow

the movement of the TYPHOON Wizard™ if

there is no extra operaon on the TYPHOON

Wizard™.

Follow Me funcon can be switched to by

the following steps:

When in Smart Mode, press the Magic

Buon quickly once, it is "follow me" model if

Aircra Mode LED is yellow and Wizard™ GPS

LED is green

GENERAL SAFETY PRECAUTIONS AND WARNINGS

· Failure to use this product in the intended manner as described in instrucon manual can

result in damage to the product, property and/or cause serious injury. This product is not a

toy! If misused it can cause serious body harm and damage to property.

· As the user of this product you are solely and wholly responsible for operang it in a manner

that does not endanger yourself and others or result in damage to the product or the

property of others.

· Do not aempt to operate your equipment in areas with potenal magnec and/or radio

interference including areas nearby broadcast towers, power transmission staons, high

voltage power lines, etc.

FCC STATEMENT:

This equipment has been tested and found to comply with the limits for Part 15 of the FCC

rules. These limits are designed to provide reasonable protecon against harmful

interference in a residenal installaon. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instrucons, may

cause harmful interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular installaon. If

this equipment does cause harmful interference to radio or television recepon, which can

be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and receiver.

• Connect the equipment to an outlet on a circuit diﬀerent from that to which the receiver is

connected.

This device complies with part 15 of the FCC rules. Operaon is subject to the following two condions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operaon.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protecon against harmful interference in a residenal installaon. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instrucons, may cause harmful interference to radio

communicaons. However, there is no guarantee that interference will not occur in a

parcular installaon. If this equipment does cause harmful interference to radio or

television recepon, which can be determined by turning the equipment oﬀ and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separaon between the equipment and receiver.

—Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver

is connected.

—Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modiﬁcaons not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

IC RADIATION EXPOSURE STATEMENT FOR CANADA

This device complies with Industry Canada licence-exempt RSS standard(s).

Operaon is subject to the following two condions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that may

cause undesired operaon of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitaon est autorisée aux deux condions suivantes : (1) l'appareil

ne doit pas produire de brouillage, et (2) l'ulisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est suscepble d'en compromere le fonconne-

ment.

This equipment complies with IC RSS-102 radiaon exposure limit set forth for an

uncontrolled environment.

Cet équipement respecte les limites d'exposion aux rayonnements IC déﬁnies pour un

environnement non contrôlé

CHARGING THE BATTERIES

BATTERY WARNINGS AND USAGE GUIDELINES

WARNING: Lithium Polymer (LiPo) baeries are signiﬁcantly more volale than alkaline,

NiCd or NiMH baeries. All instrucons and warnings must be followed exactly to prevent

property damage and/or serious injury as the mishandling of LiPo baeries can result in ﬁre.

By handling, charging or using the included LiPo baery you assume all risks associated with

LiPo baeries. If you do not agree with these condions please return the complete product

in new, unused condion to the place of purchase immediately.

• You must always charge the LiPo baery in a safe, well-venlated area away from

ﬂammable materials.

• Never charge the LiPo baery unaended at any me. When charging the baery you

must always remain in constant observaon to monitor the charging process and react

immediately to any potenal problems that may occur.

• Aer ﬂying/discharging the LiPo baery you must allow it to cool to ambient/room

temperature before recharging.

• To charge the LiPo baery you must use only the included charger or a suitably compable

LiPo baery charger. Failure to do so may result in a ﬁre causing property damage and/or

serious injury.

• If at any me the LiPo baery begins to balloon or swell, disconnue charging or

discharging immediately. Quickly and safely disconnect the baery, then place it in a safe,

open area away from ﬂammable materials to observe it for at least 15 minutes. Connuing

to charge or discharge a baery that has begun to balloon or swell can result in a ﬁre. A

baery that has ballooned or swollen even a small amount must be removed from service

completely.

• Do not over-discharge the LiPo baery. Discharging the baery too low can cause

damage to the baery resulng in reduced power, ﬂight duraon or failure of the baery

enrely. LiPo cells should not be discharged to below 3.0V each under load.

• Store the LiPo baery at room temperature and in a dry area for best results.

• When charging, transporng or temporarily storing the LiPo baery the temperature

range should be from approximately 40–120° F (5–49°C). Do not store the baery or

aircra in a hot garage, car or direct sunlight. If stored in a hot garage or car the baery can

be damaged or even catch ﬁre.

• Never leave baeries, chargers and power supplies unaended during use.

• Never aempt to charge low voltage, ballooned/swollen, damaged or wet baeries.

• Never allow children under 14 years of age to charge baeries.

• Never charge a baery if any of the wire leads have been damaged or shorted.

• Never aempt to disassemble the baery, charger or power supply.

• Never drop baeries, chargers or power supplies.

• Always inspect the baery, charger and power supply before charging.

• Always ensure correct polarity before connecng baeries, chargers and power supplies.

• Always disconnect the baery aer charging.

• Always terminate all processes if the baery, charger or power supply malfuncons.

SPECIFICATIONS

Dimensions 5.47 X 1.46 X 0.98 in (139 X 37 X 25 mm)

Weight (with LiPo Baery) 2.52 oz ( 71.5 g )

Compable Aircfra TYPHOON Q500 / Q500+ / Q500 4K / Black / G

Compable Camera CGO2GB / CGO2+ / CGO3

Water Resistant Yes

Working Hours 3.5 h

Built-In LiPo Baery Voltage / Capacity 3.7V 500mAh

NOTICES AND WARNINGS

1. The Wizard™ CAN'T replace the Personal Ground Staon/Remote Controller because it has no Wiﬁ.

2. The Wizard™ is water resistant but NOT waterproof, Do not submerge the Wizard™ in water

even if it is in the waterproof carrying pouch. This will cause the aircra to lose signal.

3. Do not use Home Mode when ﬂying near bodies of water.

4. Be sure to turn oﬀ the Wizard™ when you do not use it.

5. Be sure to operate the Wizard™ in open areas that are free from people, vehicles and other

obstrucons. Never ﬂy near or above crowds, airports or buildings.

You can charge the LiPo baery in the

TYPHOON Wizard™ by using supplied

USB cable and inserng it into the USB

port on your computer. Make sure the

TYPHOON Wizard™ is OFF and connect

cable into open USB port on your

computer. The Power LED will show solid

RED while baery is charging, when

charging is completed the red LED light

will turn oﬀ. It will take approximately 2

hours to charge a fully discharged baery.

A fully charged baery will give an

operang me of 3.5 hours per charge.

WARNING: Do not take out the LiPo baery installed in the TYPHOON Wizard™, otherwise

the TYPHOON Wizard™ may be damaged.

CUSTOMER SERVICE

YUNE EC EU

24568 Kaltenkirchen, Germany

+49 4191 932620

eu sales@yuneec.com

YUNE EC AU

53 Ellemsea Circuit, Lonsdale

South Australia 5160

+61 (0) 8 8186 3301

aussales@yuneec.com

YUNE EC USA

5555 Ontario Mills Parkway,

Ontario, CA91764, USA

1 855 284 8888

sales@yuneec.com

YUNE EC HK

2/F, Man Shung Industrial Building,

7 Lai Yip Stree t, Kwu n Tong,

Kowloon, Hong Kong

852 3616 6071

asiasales@yuneec.com

hp://yuneec.com/support

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two

condions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operaon.

0°

50°

90°

0°

40°

90°

Ascend

Fly Forward

Descend Fly Backward

Turn Le

Fly to the

Le Direcon

Fly to the

Right Direcon

Turn Right

PILOT LOCATION

13-26  (4-8m)

LANDING

LOCATION

Shake

Smart Circle

WIZARD™ LED STATUS:

Aircra Mode LED

Wizard™ GPS LED

Aircra Status LED

Wizard™ Power LED:

GPS Locked: LED solid green.

The Communicaon Mal-funcon Between the Wizard™ and the Aircra : LED solid red

GPS Loss of Aircra: LED oﬀ

Aircra in No-Fly Zone: LED blinking red, green and blue alternately

Baery full：LED solid green

Baery 50%：LED blinking green twice every 2 seconds

Baery 25%：LED blinking green once every 2 seconds

Low Voltage Warning of the Aircra:

LED blinking red quickly, the Wizard™ vibrang for 2 seconds once connuously

Powered On: LED solid green

During Charging: LED solid red

Charging Completed: Red LED oﬀ

Low Voltage Warning of the Wizard™:

Low Baery--- LED blinking green twice every 2 seconds

Low Voltage--- LED blinking green once every 2 seconds

Power Cut-oﬀ---LED blinking red quickly, the Wizard™ vibrang for 2 seconds once

connuously.

Smart Mode: LED solid green

Watch Me Funcon: LED solid green

Follow Me Funcon: LED solid yellow

Angle Mode: LED solid purple

Home Mode: LED solid red

‘Point To Fly’ Funcon Acvated: LED solid blue

Any informaon above might be changed due to the soware update. For the latest

documents, please check the oﬃcial website.

When the Aircra Status LED is solid yellow or blinking yellow frequently, it indicates

calibraon is needed. The operaon can be referred to the video of calibraon from our

oﬃcial website: www.yuneec.com

If there is no proper calibraon, the Point to Fly funcon won't work even when pressing the

magic buon, the Wizard™ will vibrate twice as a warning signal(it only vibrates once in the

normal condion).

OVERVIEW

1. Aircra Mode LED

2. Wizard™ GPS LED

3. Aircra Status LED

4. Ascend / Forward Buon

5. Turn / Fly to the Le Side Buon

6. Turn / Fly to the Right Side Buon

7. Descend / Backward Buon

8. Magic Buon

9. Pitch Control Buon-down

10. Pitch Control Buon-up

11. Start / Stop Motors Buon

12. Wizard™ Power Buon

13. Wizard™ Power LED

14. Smart / Angle / Home Mode Switch

15. Clip

16. USB Port

109

POWERING ON/OFF:

Press and hold the Power Buon . When all LEDs blink once and the TYPHOON Wizard™

vibrates once, release the Power buon . The Power LED glows solid green, and the Aircra

Mode LED is on, then the TYPHOON Wizard™ is powered on successfully.

NOTICE: Gyroscopes Mal-funcon: If the TYPHOON Wizard™ keeps vibrang when

powering on and fails to power on, please return it to the service center for maintenance.

Wizard™ Poinng Direcon

1) Watch Me Funcon Under Smart Mode

Watch Me funcon enables the camera to

keep tracking the TYPHOON Wizard™ no

maer where and how it moves as the

camera can automacally lt its angle

according to the controller. It is "watch me"

model if both the LEDs for Aircra Mode

and Wizard™ GPS are green.

Usually, the default funcon under the

Smart Mode is Watch Me.

FLIGHT MODES

SMART MODE

When the Flight Mode Selecon Switch is in the top posion, the aircra will be in the Smart

Mode. The Aircra Mode LED will glow solid green.

IMPORTANT NOTE: It’s safer and beer for the longevity of the baery to store it only

parally charged for any length of me. Storing the baery approximately 50%, charged

(which is around 3.85V per cell) is typically best, however, it will take some careful

management of the charge me and the use of a volt meter to achieve this voltage. If you

have the equipment and skills to achieve the 50% charge level for storage it is recommend-

ed. If not, simply be sure to not store the baery fully charged whenever possible. In fact, as

long as the baery will be stored at approximately room

temperature and for no more than a few weeks before the next use, it may be best to store

the baery in the discharged state aer the last ﬂight (as long as the baery was not

over-discharged on the last ﬂight).

Produktspecifikationer

Varumärke:	Yuneec
Kategori:	Leksaker
Modell:	Typhoon Wizard
Färg på produkten:	Grijs
Vikt:	23700 g
Bredd:	- mm
Djup:	- mm
Höjd:	1835 mm
Förpackningens vikt:	- g
Förpackningens bredd:	1020 mm
Djuppackning:	1180 mm
Förpackningshöjd:	175 mm
Typ av förpackning:	Doos
Maximal viktkapacitet:	120 kg
Material:	Kunststof
Bästa användningen:	Opbouwzwembad
Produkter per pall:	20 stuk(s)
Typ produkt:	Ladder
Förpackningsvolym:	210000 cm³
Intrastatkod:	95069990
Minimum antal:	1 stuk(s)
Antal steg på stegen:	4 stappen