ZKTeco ZKP8008 Bruksanvisning

ZKTeco Skrivare ZKP8008

Läs gratis den bruksanvisning för ZKTeco ZKP8008 (40 sidor) i kategorin Skrivare. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 7.5 recensioner. Har du en fråga om ZKTeco ZKP8008 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/40

POS-80-Series Printer

Programmer Manual

POS-80-Series Printer Programmer Manual

[Name] Horizontal tab

[Format] ASCII HT

Hex 09

Decimal 9

[Description] Moves the print position to the next horizontal tab position.

[Details] • This command is ignored unless the next horizontal tab position has been set.

• If the next horizontal tab position exceeds the printing area, the printer sets the

printing position to [Printing area width + 1].

• Horizontal tab positions are set with ESC D.

• If this command is received when the printing position is at [printing area

width+ 1], the printer executes print buffer-full printing of the current line and

horizontal tab processing from the beginning of the next line.

• The default setting of the horizontal tab position for the paper roll is font A(12

×24) every 8th character (9th, 17th, 25th, ... column).

[Reference] ESC D

[Name] Print and line feed

[Format] ASCII LF

Hex 0A

Decimal 10

[Description] Prints the data in the print buffer and feeds one line based on the current line

spacing.

[Note] This command sets the print position to the beginning of the line.

[Reference] ESC 2, ESC 3

[Name] Print and carriage return

POS-80-Series Printer Programmer Manual

[Format] ASCII CR

Hex 0D

Decimal 13

[Description] When automatic line feed is enabled, this command functions the same

as LF, when automatic line feed is disabled, this command is ignored.

[Details] • Sets the print starting position to the beginning of the line.

• The automatic line feed is ignored with a serial interface model.

• This command is set according to the DIP switch 1-1 setting with a

parallel interface model.

[Reference] LF

DLE EOT n

[Name] Real-time status transmission

[Format] ASCII DLE EOT n

Hex 10 04 n

Decimal 16 4 n

[Range] 1≤n≤4

[Description] Transmits the selected printer status specified by n in real-time,

according to the following parameters:

n = 1: Transmit printer status

n = 2: Transmit off-line status

n = 3: Transmit error status

n = 4: Transmit paper roll sensor status

[Details] The status is transmitted whenever the data sequence of <10>H<04>H<

n> (1≤n≤4) is received.

Example:In ESC m nL nH d1...dk, d1=<10>H, d2=<04>H, d3=<01>H

This command should not be used within the data sequence of another

command that consists of 2 or more bytes.

Example:If you attempt to transmit ESC 3 n to the printer, but DTR (DSR

for the host computer) goes to MARK before n is transmitted and then DLE

EOT 3 interrupts before n is received, the code <10>H for DLE EOT 3 is

Produktspecifikationer

Varumärke:	ZKTeco
Kategori:	Skrivare
Modell:	ZKP8008
Inbyggd display:	Nej
Färg:	Nej
Wi-Fi:	Nej
Internminne:	- MB
Modell:	POS-skrivare
Maximal rulldiameter:	83 mm
USB-kontakt:	USB Typ B
Skrivhastighet:	260 mm/sek
Inbyggda streckkoder:	1D
Produktens färg:	Svart
Anslutningsteknologi:	Kabel
Nätverksansluten (Ethernet):	Ja
Strömkälla av typen:	DC
Antal USB 2.0 anslutningar:	1
USB-port:	Ja
Utskriftsteknologi:	direkt termal
Stöds pappersbredd:	0.06 - 0.08 mm
teckenuppsättningar:	ASCII