Zmodo Smart Bruksanvisning

Läs nedan 📖 manual på svenska för Zmodo Smart (10 sidor) i kategorin Dörrklocka. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/10
QUICK
START GUIDE
SMART DOORBELL
Before you begin
1
Make sure that your wiring is connected to a
mechanical doorbell chime and a transformer
with a low-voltage of 10VAC-36VAC.
Make sure that your package includes the smar t
doorbell, 6 screws and 6 anchors.
You will need a strong WiFi connection near
your doorbell.
Congratulations! We are excited to welcome you
to the next generation of smart technology. We
believe that our products can bring you the best
in convenience and security.
Follow the steps below to install and set up the
doorbell:
DO NOT directly attach the doorbell to primary
power (110/120 VAC and 220/230/240 VAC).
If you do not use a doorbell chime, you MUST
use a 20 ohm/10 watt resistor between the
smart doorbell and one wire from the power
source. Resistor not included in packaging.
Failing to do so will cause damage to the smart
doorbell and void the warranty.
Remove the mounting bracket from your
Smart Doorbell. Loosen the two screws on
the bottom of the doorbell and slide down
to remove the mounting bracket.
Loosen these two screws
Mounting your doorbell
2
Remove your existing doorbell button.
Once youve removed your old doorbell,
make sure that the two wires used to
connect your doorbell button remain
exposed.

Produktspecifikationer

Varumärke: Zmodo
Kategori: Dörrklocka
Modell: Smart

Behöver du hjälp?

Om du behöver hjälp med Zmodo Smart ställ en fråga nedan och andra användare kommer att svara dig




Dörrklocka Zmodo Manualer

Dörrklocka Manualer

Nyaste Dörrklocka Manualer