ZyXEL P-871M Bruksanvisning

ZyXEL Router P-871M

Läs gratis den bruksanvisning för ZyXEL P-871M (20 sidor) i kategorin Router. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 4 recensioner. Har du en fråga om ZyXEL P-871M eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/20
Copyright © 2009. All rights reserved
P-871M
VDSL Modem
User’s Guide
Version ME1
11/2009
Edition 2
DEFAULT LOGIN
Password 1234
Console Port Speed 38400 bps
P-871M User’s Guide
2
Overview
The P-871M is a VDSL modem in CPE (Customer Premises
Equipment) mode and can also act as CO (Central Office)
equipment. CO equipment is where home and office phone
lines terminate and connects to a much larger switching
system. In the following example, you can build up a VDSL
bridge connection between two P-871Ms.
This guide covers:
Overview, page 2
Hardware Connections, page 3
CLI Commands Configuration, page 6
Firmware Upgrade, page 9
Wall-mounting Instructions, page 12
3
P-871M User’s Guide
1 Hardware Connections
You can set the P-871M to work in either CO mode or CPE
mode. Follow the procedure below to complete the hardware
connections.
1.1 CO Mode
1Set the CO/CPE switch on the rear panel to the CO side.
2Use the included console cable to connect the CONSOLE
port to your computer’s COM port for configuration.
3Use the included yellow Ethernet cable to connect the
ETHERNET port to your network device, such as a switch.
4Over ISDN: Use the included gray cable with a RJ-45
connector to connect the DSL port to another P-871M in
CPE mode.
Over POTS: Use the included gray cable with a RJ-11
connector to connect the DSL port to another P-871M in
CPE mode.
3
1
24
5
6
CO
CPE

Produktspecifikationer

Varumärke: ZyXEL
Kategori: Router
Modell: P-871M

Behöver du hjälp?

Om du behöver hjälp med ZyXEL P-871M ställ en fråga nedan och andra användare kommer att svara dig