Acti d81 Bruksanvisning
Läs nedan 📖 manual på svenska för Acti d81 (36 sidor) i kategorin övervakningskamera. Denna guide var användbar för 21 personer och betygsatt med 5.0 stjärnor i genomsnitt av 11 användare
Sida 1/36
4 Outdoor Dome Series ”
Hardware Manual
D71 72, D 71, E , E73, , D 81 82, D , E 72
E74, E , E , E 85, E86 81 82 83, E 84, E
201 123/ /11
www.acti.com
Hardware Manual
2
Table of Contents
Precautions ............................................................. 4
Safety Instructions .................................................................................... 6
Introduction ............................................................. 7
The List of Models ..................................................................................... 7
Package Contents ...................................................................................... 8
Physical Description ................................................................................. 9
Mounting Options .................................................................................... 10
Other Mounting Accessories ................................................................. 12
Installing the Camera on a Surface ..................... 13
Step 1: Drill the Holes .............................................................................. 13
Step 2: Open the Dome Cover ................................................................ 14
Step 3: Prepare for Waterproof Installation ........................................... 15
Waterproof Solution with Naked Cable ................................................. 16
Waterproof Solution with Conduit .......................................................... 18
Step 4: Install the Camera to the Surface .............................................. 21
Step 5: Connect the Cable ...................................................................... 22
Step 6: Access the Camera Live View .................................................... 23
Step 7: Adjust the Viewing Angle and Focus ........................................ 23
Step 8: Close the Dome Cover ................................................................ 23
Other Adjustments and Accessories .................. 24
Focus and Viewing Angle Adjustments ................................................. 24
D7x / E7x Series ................................................................................... 24
D8x / E8x Series ................................................................................... 26
www.acti.com
Hardware Manual
3
Replacing the Dome Cover ..................................................................... 27
Accessing the Camera ......................................... 30
Configure the IP Addresses .................................................................... 30
Access the Camera .................................................................................. 34
www.acti.com
Hardware Manual
4
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to follow
the safety instruction given may directly endanger people, cause damage to the system or to
other equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your local
office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.
www.acti.com
Hardware Manual
5
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to the equipment that are not expressly approved by the
responsible party for compliance could void the user’s authority to operate the equipment.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
www.acti.com
Hardware Manual
6
Safety Instructions
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may cause
hazards.
Do use accessories not recommended by the manufacturer not
Only install this device in a dry place protected from weather
Servicing
Do not attempt to service this video product yourself Refer all servicing to qualified service .
personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to qualified
service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the video product.
3) If the inner parts of video product ha been directly exposed to rain or water. ve
4) If the video product does not operate normally by following the operating Instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as an improper
adjustment of other controls may result in damage, and will often require extensive work by a
qualified technician to restore the video product to its normal operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine the video product is in proper operating condition. if
www.acti.com
Hardware Manual
7
Introduction
The List of Models
This hardware manual contains the following models:
D71
1MP Outdoor Dome with D/N, IR, Fixed lens
D 72
3MP Outdoor Dome with D/N, IR, Fixed lens
D 81
1MP Outdoor Dome with D/N, IR, Vari-focal lens
D 82
3MP Outdoor Dome with D/N, IR, Vari-focal lens
E 71
1MP Outdoor Dome with D/N, IR, Basic WDR, Fixed lens
E 72
3MP Outdoor Dome with D/N, IR, Basic WDR, Fixed lens
E 73
5MP Outdoor Dome with D/N, IR, Basic WDR, Fixed lens
E 74
3MP Outdoor Dome with D/N, IR, Superior WDR, Fixed lens
E 81
1MP Outdoor Dome with D/N, IR, Basic WDR, Vari-focal lens
E 82
3MP Outdoor Dome with D/N, IR, Basic WDR, Vari-focal lens
E 83
5MP Outdoor Dome with D/N, IR, Basic WDR, Vari-focal lens
E 84
2MP Outdoor Dome with D/N, IR, Basic WDR, SLLS, Vari-focal lens
E 85
1MP Outdoor Dome with D/N, IR, Superior WDR, Vari-focal lens
E 86
3MP Outdoor Dome with D/N, IR, Superior WDR, Vari-focal lens
From the installation perspective these models are very similar; therefore you can use one manual
for all of them.
www.acti.com
Hardware Manual
8
Package Contents
D7x / D8x / E7x / E8x Series
Camera
(D7x / E7x Series)
Camera
(D8x / E8x Series)
Mounting Screw Kit
Conduit Gland
Cable Gland
Hexagon Screwdriver
(Available in select models only)
Lens Focus Tuner
(for D7x / E7x series only)
Drill Template
Quick Installation Guide
Warranty Card
Drill Template
or
www.acti.com
Hardware Manual
9
Physical Description
1) Reset Button
The purpose of reset button is to restore the factory default settings of the camera, including the
administrator s password. ’
The reset button can be used for following purposes:
1. The administrator’s password has been forgotten and therefore the camera cannot be
accessed.
2. In case of IP address, mask, or allow/deny filter related issues, resulting with inability to modify
these settings.
3. In case of connectivity issues or abnormal video quality.
How to do the reset properly?
Press and hold the reset button for 5 seconds.
2) Memory Card Slot
Insert a memory card into this slot for local recording. This slot supports microSDHC and
microSDXC standards (card not included in the camera package). For more information on using
the memory card, please refer to the Firmware User Manual.
3) Ethernet Port
Connects to a network using an Ethernet cable .
www.acti.com
Hardware Manual
11
Straight Wall
Mount
Suitable when mounting the camera on straight walls.
PMAX-0308 (L-Type Wall Mount)
PMAX-0101 PMAX-0305 (Heavy Duty Wall Mount)
Vertical Pole
Mount
Suitable when mounting the camera on vertical poles.
PMAX-0101 PMAX-0305 PMAX- 0503
Horizontal
Pole Mount
Suitable when mounting the camera on horizontal poles.
PMAX- PMAX-0102 PMAX- 0101 0503
Corner
Mount
Suitable when mounting the camera on a corner wall.
PMAX-0101 PMAX-0305 PMAX- 0402
www.acti.com
Hardware Manual
12
Other Mounting Accessories
Accessories
PMAX-0104 (Extension Tube)
NOTE:
For more information about the mounting solutions and accessories, please check the
Mounting Accessory Selector in our website (http://www.acti.com/mountingselector).
The above mounting accessories are not included in the package. Contact your sales
agents to purchase.
www.acti.com
Hardware Manual
13
Installing the Camera on a Surface
This section describes the procedures in installing the camera on a flat surface such as a hard or
dropped ceiling and straight or tilted walls.
Step 1: Drill the Holes
1. Using the supplied drill template, mark the screw holes location on the surface, then drill the
holes and insert the plastic plugs.
2. Determine how the cables will be routed: or pass through the surface along the surface.
If the cables will pass through the surface:
a. Mark and drill the conduit hole location on the surface as shown on the drill
template.
b. Remove the metal cap covering the bottom conduit hole of the camera, and
attach the cap to the side conduit hole to close it. Route the network cable to
pass this hole from the surface.
If the cables will be routed along the surface, skip to the next step.
www.acti.com
Hardware Manual
14
Step 2: Open the Dome Cover
1. Remove the plastic covering the camera.
2. Loosen the three (3) screws securing the dome cover.
3. Carefully lift to open the dome cover and place it on the side of the camera.
NOTE: Do not abruptly lift the dome cover; it is attached to the camera with a spring wire.
www.acti.com
Hardware Manual
15
Step 3: Prepare for Waterproof Installation
The camera comes with two (2) glands used for waterproof installation:
Cable Gland Exterior-grade Ethernet cable: For use with an . Exterior-grade Ethernet
cables are already waterproof. See Waterproof Solution with Naked Cable on page . 16
Conduit Gland: For use with a flexible conduit. This solution is recommended when an
exterior-grade Ethernet cable is not available. See Waterproof Solution with Conduit
on page . 18
Determine the type of waterproof solution that is applicable to your installation requirements and
prepare the necessary accessories or purchase extra materials.
Cable Gland
Conduit Gland
For use with an Exterior-grade Ethernet
cable (not included in the package).
For use with flexible conduit (not a 3/8”
included in the package).
For use with flexible conduit (not 1/2”
included in the package)
NOTE: The bundled conduit gland may vary.
Check the conduit gland that came with your
package to determine if 3/8” or 1/2" is the
suitable flexible conduit size.
or
www.acti.com
Hardware Manual
16
Waterproof Solution with Naked Cable
This section describes the procedures in using the bundled cable gland and an exterior-grade
Ethernet cable.
1. Disassemble the cable gland as shown below:
2. Insert the clamping nut into the Ethernet cable.
3. Insert the sealing insert with claw.
Body
(with Washer)
Sealing Insert
with Claw
Clamping
Nut
www.acti.com
Hardware Manual
17
4. Attach the cable gland body to the hole of the camera.
Attach to Camera Side Hole Attach to Camera Bottom Hole
5. If the cable will be routed along the surface, skip this step.
If the cable will pass through the surface, do the following:
a. Pull the network cable through the bottom conduit hole.
b. Insert the sealing insert with claw into the cable gland body and then attach the clamping
nut to complete the cable solution.
NOTE: Make sure the clamping nut is tightly attached to the cable gland body and the sealing
insert is squeezed tightly.
6. 21 Proceed with on page Step 4: Install Camera to the Surfacethe .
or
www.acti.com
Hardware Manual
18
Waterproof Solution with Conduit
This section describes the procedures to waterproof the cabling connections using the bundled
conduit gland and flexible conduit. This is the recommended if an exterior-grade Ethernet cable is
not available.
1. Prepare the following materials for waterproof installation:
Conduit Gland
(included in the camera package)
For use with 3/8” flexible conduit
For use with 1/2” flexible conduit
Flexible Conduit
3/8” or 1/2" Trade size
(not included in the package)
Network Cable
CAT 5 or CAT 6
(not included in the package)
NOTE: The bundled conduit gland may vary.
Check the conduit gland that came with your
package to determine if 3/8” or 1/2" is the
suitable flexible conduit size.
or
www.acti.com
Hardware Manual
19
2. Disassemble the bundled conduit gland as shown below:
NOTE: In this installation, the conduit gland body can be securely attached to the mount kit;
therefore the use of lock nut is not necessary. Please set the lock nut aside.
3. Pull the network cable through the flex conduit.
4. Insert the clamping nut through the flex conduit.
Lock Nut
Body
Sealing Insert
Clamping Nut
www.acti.com
Hardware Manual
20
5. Insert the sealing insert and attach it at the end of the flex conduit.
6. Screw the conduit gland body to the conduit hole of the camera.
Attach to Side Conduit Hole Attach to Bottom Conduit Hole
7. If the cable will be routed along the surface, If the cable will pass through skip this step.
the surface, do the following:
a. Pull the network cable through the bottom conduit hole.
or
www.acti.com
Hardware Manual
22
Step 5 Connect the Cable :
1. If the cable will be routed along the surface, pull the network cable through the side
conduit hole and attach the clamping nut to the conduit gland body. If the cable passes
through the surface, skip step 2. to
Using Flex Conduit Using Naked Cable
2. Connect the network cable to the Ethernet port of the camera.
3. Connect the other end of the network cable to a Power-over-Ethernet (PoE) switch or injector.
Then, connect the PoE switch or injector to a network or PC and a power source. See
example connection diagram below.
Network
AC Power
Source
PoE Injector /
PoE Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera
or
www.acti.com
Hardware Manual
23
Step 6: Access the Camera Live View
See on page for more information on how to access the Live View of Accessing Camerathe 30
the camera.
Step 7: Adjust the Viewing Angle and Focus
Based on the live view, adjust the viewing angle and orientation of the camera. Adjustments vary
per model, for detailed information, please refer to Focus and Viewing Angle Adjustments on
page . 24
Step 8: Close the Dome Cover
1. Align the position of the dome cover shroud to the direction of the lens.
2. Tighten the three (3) screws to attach the dome cover to the camera body.
www.acti.com
Hardware Manual
25
1. Loosen the tilt adjustment screws, adjust the tilt, and then tighten back the screws to fix
the tilt position.
2. Move the rotation adjustment to rotate the viewing orientation.
3. Loosen the pan adjustment screw, move the pan direction, and then tighten back the
screw to fix the pan position.
4. Attach the bundled lens focus tuner unto the lens and turn left or right to adjust the focus.
www.acti.com
Hardware Manual
27
Replacing the Dome Cover
For more discrete surveillance needs, the bundled dome cover can be replaced with a smoke,
vandal proof cover available for purchase. To replace the dome cover, do the following:
1. Loosen the three (3) screws to open the dome cover.
2. Using a screwdriver, remove the screw securing the spring wire to the dome cover.
NOTE: Hold the spring wire as the screw is being removed to avoid the sudden release of the
screw and cause it to fly in the air.
3. Remove the three (3) screws to detach the cover bracket.
www.acti.com
Hardware Manual
28
4. Remove dome cover from the cover housing.
5. Remove the shroud from the dome cover.
6. Insert the shroud into the replacement dome cover.
7. Insert the replacement dome cover into the cover housing.
www.acti.com
Hardware Manual
29
8. Align and attach the three (3) screws to secure the bracket to the cover housing.
9. Fit the screw into the spring wire that is attached to the camera.
10. Attach the screw to the dome cover using a screwdriver. Final installation should look like the
illustration below.
Produktspecifikationer
| Varumärke: | Acti |
| Kategori: | övervakningskamera |
| Modell: | d81 |
Behöver du hjälp?
Om du behöver hjälp med Acti d81 ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera Acti Manualer
1 Januari 2025
27 Oktober 2024
27 Oktober 2024
18 September 2024
16 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
9 September 2024
övervakningskamera Manualer
- övervakningskamera Beafon
- övervakningskamera NetMedia
- övervakningskamera Thomson
- övervakningskamera Aluratek
- övervakningskamera Epiphan
- övervakningskamera Ubiquiti Networks
- övervakningskamera Canyon
- övervakningskamera Orion
- övervakningskamera IDIS
- övervakningskamera Honeywell
- övervakningskamera Tapo
- övervakningskamera Ikegami
- övervakningskamera Summer Infant
- övervakningskamera Gewiss
- övervakningskamera Nexxt
Nyaste övervakningskamera Manualer
31 Maj 2025
31 Maj 2025
31 Maj 2025
5 April 2025
5 April 2025
5 April 2025
28 Januari 2025
25 Januari 2025
25 Januari 2025
16 Januari 2025