ADATA XPG Spectrix S40G Bruksanvisning
ADATA
Solid State-enheter (ssd)
XPG Spectrix S40G
Läs gratis den bruksanvisning för ADATA XPG Spectrix S40G (9 sidor) i kategorin Solid State-enheter (ssd). Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 4 recensioner. Har du en fråga om ADATA XPG Spectrix S40G eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/9
www.xpg.com
XPG RGB Soware Instrucon
1. Proles
Area 1: There are four proles for you to customize. Select the prole,
customize , and click “Apply” to save the prole sengsit .
Area 2: Clicking on the “Reset button will revert the prole back to its ”
default setngs.
Area Click “Apply to save your customized prole setngs. 3: ”
2. Lighng Effect Stac─
Area 1: Click on the desired LED LED 1 to LED 8”) to be adjusted. To sync (“
all the LEDs with “LED 1” click “Sync to LED 1.”
Area 2: Adjust colors as follows:
www.xpg.com
① Click on the desired color on the color ring (or drag the white knob
onto the desired color).
② Input the RGB values directly (or drag the white knobs corresponding
to R, G, B, S). S is color saturaon.
③ Input HEX v ue directly al
Area 3: Five preset colors
Area 4: LED On/Off switch
Area 5: Brightness adjustment
Aer achieving the desired sengs, click “Apply to save.”
3. Lighng Effect Breathing ─
Area 1: Click on the desired LED LED 1 to LED 8”) to be adjusted. To sync (“
all the LEDs with “LED 1” click “Sync to LED 1.”
Area 2: Adjust colors as follows:
① Click on the desired color on the color ring (or drag the white knob
onto the desired color).
② Input the RGB values directly (or drag the white knobs corresponding
to R, G, B, S). S is color saturaon.
③ Input HEX value directly
Area 3: Five preset colors
Area 4: LED On/Off switch
Area 5: Brightness adjustment
Area 6: Light effect speed adjustment. To speed up adjust the knob to the
le and vice versa to slow down.
Aer achieving the desired sengs, click “Apply to save.”
www.xpg.com
4. Lighng Eect Strobing ─
Area 1: Click on the desired LED LED 1 to LED 8”) to be adjusted. To sync (“
all the LEDs with “LED 1” click “Sync to LED 1.”
Area 2: Adjust colors as follows:
① Click on the desired color on the color ring (or drag the white knob
onto the desired color).
② Input the RGB values directly (or drag the white knobs corresponding
to R, G, B, S). S is color saturaon.
③ Input HEX value directly
Area 3: Five preset colors
Area 4: LED On/Off switch
Area 5: Brightness adjustment
Area 6: Light eect speed adjustment. To speed up adjust the knob to the
le and vice versa to slow down.
Aer achieving the desired sengs, click “Apply to save.”
5. Lighng Eect Cycle─
Produktspecifikationer
| Varumärke: | ADATA |
| Kategori: | Solid State-enheter (ssd) |
| Modell: | XPG Spectrix S40G |
Behöver du hjälp?
Om du behöver hjälp med ADATA XPG Spectrix S40G ställ en fråga nedan och andra användare kommer att svara dig
Solid State-enheter (ssd) ADATA Manualer
30 December 2025
30 December 2025
30 December 2025
28 December 2024
17 December 2024
17 December 2024
17 December 2024
17 December 2024
17 December 2024
17 December 2024
Solid State-enheter (ssd) Manualer
- DIGISTOR
- MSI
- Corsair
- Advantech
- G-Technology
- Kioxia
- SanDisk
- Toshiba
- Kingston Technology
- Aluratek
- Gigabyte
- Freecom
- Patriot
- IStorage
- Silicon Power
Nyaste Solid State-enheter (ssd) Manualer
9 April 2025
12 Februari 2025
15 Januari 2025
8 Januari 2025
7 Januari 2025
3 Januari 2025
31 December 2025
29 December 2024
29 December 2024
22 December 2024