Adder X2-Silver Bruksanvisning
Läs nedan 📖 manual på svenska för Adder X2-Silver (44 sidor) i kategorin Växla. Denna guide var användbar för 17 personer och betygsatt med 5.0 stjärnor i genomsnitt av 9 användare
Sida 1/44
TO LOCAL
POWER
www.adder.com
TO LOCAL
POWER
www.adder.com
REMOTE
www.adder.com
TO LOCAL
POWER
AdderLink X2-Series
Remote Extenders
1
Contents
Welcome
Introduction 2 .................................................................................
Supplied items 3 .............................................................................
Installation and operation
Installation 4 ...................................................................................
Stage A - Configuration switch settings 4 ................................
LOCAL module switches 4 .....................................................
REMOTE module switches 5 .................................................
Stage B - Mounting a module – desk or rack 6 ........................
Installation Advice 6 ..............................................................
Stage C - Connections 7 .............................................................
Connections at the LOCAL module 7 ...................................
Connections at the REMOTE module 8 ................................
Operation 10 ...................................................................................
Power and activity indicators 10 ...............................................
General use 10 ...........................................................................
Locking and unlocking the system 10 ......................................
Special configuration
Configuration 11 ............................................................................
What are hotkeys? 11 ...........................................................
Entering, using and exiting configuration mode 11 ...........
Password setting 12 ...................................................................
Password override 12 .................................................................
Hot plugging and mouse restoration 13 ..................................
Which restore setting do I use? 13 .......................................
Microsoft and Logitech -specific mouse settings 13 ................
Image controls - sharpness and brightness 14 .........................
Skew adjustment (X2-Silver and X2-Gold only) 15 ..................
Miscellaneous settings 17 ..........................................................
Further information
Troubleshooting 18 ........................................................................
Getting assistance 18 ......................................................................
Emissions and Immunity 20 ............................................................
2
Welcome
Introduction
Thank you for choosing one of the AdderLink X2-Series products. These
compact modules allow you to place the controlling keyboard, video monitor,
mouse and a serial device up to 300 metres (200m maximum for Gold variant)
from a computer system. The range topping X2-Gold modules also allow you to
extend your audio accessories away from your computer.
There are three variants in the X2-Series and each consists of two modules: a
local module that attaches to your computer system and a remote module to
which the peripherals are connected. The long distance link between the two
modules is made via Category 5, or higher, twisted pair cabling.
Special circuitry within the remote module allows you to make adjustments to
the sharpness and brightness settings to suit your own preferences. Additionally,
the X2-Silver and X2-Gold models also feature Skew adjustment to counteract
the effects of uneven lengths of twisted pair cables that are used to carry the
video signals.
This table indicates the functional differences between the three variants within
the X2-Series:
X2 X2-Silver X2-Gold
Keyboard extension ü ü ü
Video extension ü ü ü
Mouse extension ü ü ü
RS232 serial extension ü ü ü
Digital audio extension ü
Brightness control ü ü ü
Sharpness control ü ü ü
Skew adjustment ü ü
PSU
PC
X2
LOCAL
X2
REMOTE
AUDIO
VIDEO
KEYBOARD
MOUSE
RS232 SERIAL
A special multi-cable
simplifies the connection
of the keyboard, video,
mouse and audio ports*
to the LOCAL Extender.
The video monitor,
mouse, keyboard,
serial device and audio
accessories* connect to
the REMOTE Extender.
* X2-Gold only
*
Up to 300 metres separation
between the local and
remote modules via a single
Category 5, or higher, cable
3
Supplied items
Power supply
and country-
specific mains
cable
Connections for
microphone and
speakers
(X2-Gold only)
REMOTE
www.adder.com
TO LOCAL
POWER
REMOTE X2 module
Connection
to video
monitor
Power supply
connection
Switch bank to
determine certain
modes and
fuunctions
Connection
to keyboard
Connection
to keyboard
Connection to
RS232 serial
device
Connection
to LOCAL
module
Power
and signal
activity
indicator
LOCAL
www.adder.com
TO REMO
TE POWER
LOCAL X2 module
Connection from
computer RS232
serial port
Optional
power supply
connection
Switch bank to
determine certain
modes and
functions Connection
to REMOTE
module
Multi-cable
connection from
computer
Power
and signal
activity
indicator
Multi-cable for keyboard,
video, mouse and (X2-Gold
only) audio connections
between computer and
LOCAL module
Serial for RS232
connection
between computer
and LOCAL module Information wallet
containing:
Eight self-adhesive rubber feet
Safety document
4
Installation and operation
LOCAL module switches (continued)
LOCAL Switch 1
OFF: Normal operation.
ON: (Whilst power is applied) Places the REMOTE module into password
override mode. This allows any pre-configured passwords to be altered -
particularly useful when they have been lost or forgotten. Please see the
‘Password override’ section in the ‘Special configuration’ chapter.
LOCAL Switch 2
OFF: Normal operation.
ON: Set transparent mode. Use this setting if the extender modules are to be
used with KVM switches that are not manufactured by Adder Technology.
Cascaded KVM switches often use special signals to set or identify
conditions. In transparent mode, the extender modules will pass the signals
without attempting to interpret them.
LOCAL Switch 3
OFF: Microphone input on REMOTE module. Use this setting if a standard mono-
channel microphone is connected to the MIC input on the REMOTE unit.
ON: Stereo line-in input on REMOTE module. Use this setting if a stereo input is
applied to the MIC input on the REMOTE unit.
LOCAL Switch 4
OFF: Normal operation.
ON: Suspend operation and reset the LOCAL module. Use this setting
momentarily to produce the same effect as removing and restoring power
if incorrect operation has occurred. Return the switch to the OFF position
to allow normal operation to continue.
Installation
The installation of the X2-Series extender set is straightforward and can best be
achieved in most cases by following these stages for each module:
• StageA Check or set the configuration switch settings
• StageB Mount the module
• StageC Connect the cables
Stage A - Configuration switch settings
The basic operation of the LOCAL and REMOTE modules are controlled by the
banks of four switches located on the side of each module. The switches are
monitored at all times and may be changed when power is on or off (the only
exception to this rule is switch 1 of the LOCAL module which initiates slightly
different functions depending on the power state when it is switched).
LOCAL module switches
1
ON
4
23
ON
1
ON
4
23
OFF: Normal operation
ON: Transparent mode
OFF: Normal operation
ON: reset password mode
OFF: Normal operation
ON: Reset LOCAL module
OFF: Microphone input mode
ON: Stereo line-in mode
Note: When shipped, all switches are set in the OFF positions and this will
produce normal operation with normal microphone input (at the REMOTE
module).
5
REMOTE module switches REMOTE module switches (continued)
REMOTE Switch 1
OFF: Normal operation.
REMOTE Switches 2 and 3
Switches 2 and 3 determine which two keyboard keys (when pressed in unison)
are to be designated as ‘hotkeys’. Hotkeys signal to the REMOTE module that
the next key to be pressed is a special configuration command for the module
and is not to be passed to the computer system.
2 OFF
3 OFF Hotkeys = CTRL and SHIFT
2 OFF
3 ON Hotkeys = ALT and SHIFT
2 ON
3 OFF Hotkeys = CTRL and ALT
2 ON
3 ON Hotkeys disabled
REMOTE Switch 4
This switch is reserved for future use.
Note: When shipped, all switches are set in the OFF positions and this will
produce normal operation.
1
ON
4
23
1
ON
4
23
ON
Determines configuration
of hotkeys in conjunction
with switch 3
Reserved for
future use
OFF: Normal operation
Determines configuration
of hotkeys in conjunction
with switch 2
6
Stage B - Mounting a module – desk or rack
The X2-Series extender modules can be situated on a desk (or floor) or
alternatively, for larger installations, mounted within optional rack mount chassis
units.
Desk mount
Apply the supplied self-adhesive
rubber feet to the underside of the
module(s).
Installation Advice
• Forcorrectoperation,thelocalandremoteunitsmusthaveground
connections. At the computer end, ensure that the computer or KVM switch
that the LOCAL module is connected to has a ground connection. At the
keyboard/monitor/mouse end, ensure that the REMOTE module’s power
supply is connected to a grounded power outlet. Alternatively, a ground
connection will be made via the monitor, if the monitor is itself grounded.
• Trytoavoidlayingtheinterconnectcablealongsidepowercableswhere
possible.
1
ON
4
23
Rack mount
Note: The module switches are not accessible once it is inserted into the rack,
therefore, check all settings before insertion.
1 Place the rack securing plate (available as a separate kit) onto the front of
the module and secure it with the two countersunk
screws.
2 Orient the module on its side so that its labelled
face is the correct way up and the securing plate is
facing away from the rack.
3 Slide the module into the required rack position. The
rectangular cut-out in the front upper lip of the rack
allows the two screws on the module’s upper edge to
slide through.
4 The rack mount chassis has a series of holes in its
floor that are spaced to accommodate the two
screws on the module’s lower edge. Ensure that
the screws correctly locate into the two holes of the
chosen slot. The rack securing plate on the module
should now be flush with the front of the rack mount
chassis.
5 Use the third (pan-head) screw, in the top hole of the
rack securing plate to fasten the module to the rack.
Produktspecifikationer
| Varumärke: | Adder |
| Kategori: | Växla |
| Modell: | X2-Silver |
Behöver du hjälp?
Om du behöver hjälp med Adder X2-Silver ställ en fråga nedan och andra användare kommer att svara dig
Växla Adder Manualer
1 Februari 2025
14 Januari 2025
14 Januari 2025
27 December 2024
27 December 2024
24 December 2024
24 December 2024
24 December 2024
24 December 2024
24 December 2024
Växla Manualer
- Växla Cudy
- Växla CSL
- Växla Speaka
- Växla Mikrotik
- Växla Tenda
- Växla PureTools
- Växla Worx
- Växla SmartAVI
- Växla KlikaanKlikuit
- Växla ATen
- Växla Hikvision
- Växla Alecto
- Växla AMX
- Växla Leviton
- Växla QNAP
Nyaste Växla Manualer
9 April 2025
9 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
3 April 2025
3 April 2025
2 April 2025