Adj FREQ 16 Strobe Bruksanvisning
Adj
ej kategoriserat
FREQ 16 Strobe
Läs gratis den bruksanvisning för Adj FREQ 16 Strobe (10 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2.5 recensioner. Har du en fråga om Adj FREQ 16 Strobe eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/10
User Instructions
FREQ 16 Strobe Introduction
©American DJ Supply® - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 2
Rev. 2/15
Unpacking: Thank you for purchasing the FREQ 16 Strobe by Ameri-
can DJ®. Every FREQ 16 Strobe has been thoroughly tested and has
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your xture for any
damage and be sure all accessories necessary to operate the unit has
arrived intact. In the case damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions. Do not return this unit to your dealer without rst contact-
ing customer support.
Introduction: The FREQ 16 Strobe is part of American DJ’s continu-
ing pursuit for creating high quality affordable intelligent fixtures. The
FREQ 16 Strobe is a revolutionary 16-zone LED strobe. The unit has
4 operating modes; Sound Active (with adjustable sound sensitivity),
Show Mode, Manual Mode, or DMX Control. This unit can be used as
a stand alone xture, or in a Master/Slave conguration. This fixture is
suitable for theaters, studios, retail stores, and other similar locations.
Customer Support: American DJ® provides a toll free customer sup-
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ®.
PLEASE recycle the shipping carton when ever possible.
FREQ 16 Strobe Safety Precautions
©American DJ Supply® - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 4©American DJ Supply® - www.americandj.com - FREQ 16 Strobe Instruction Manual Page 3
• To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken. Do not attempt to remove or break o the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and re in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Never operate this unit when it’s cover is removed.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out`
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by
t he manufacturer. See page 18 for cleaning details.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (inclu-
d ing amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
• Built in Microphone
• 4 DMX Channel Modes: 1 Channel Mode, 2 Channel Mode, 16
Channel Mode, & 18 Channel Mode
• 12 Show Modes
• 4 Operating Modes - Sound Active, Show Mode, Manual Mode,
and DMX Control
• Sound Sensitivity Adjustable
• UC3 Remote Control Compatiable (Not Included)
• Power Cord Daisy Chaining. See page 18.
FREQ 16 Strobe Warranty Registration
FREQ 16 Strobe Features
To optimize the performance of this product, please read these operat-
ing instructions carefully to familiarize yourself with the basic operations
of this unit. These instructions contain important safety information
regarding the use and maintenance of this unit. Please keep this manual
with the unit, for future reference.
FREQ 16 Strobe General Instructions
The FREQ 16 Strobe carries a 2 year (730 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase
and warranty. You may also register your product online at www.
americandj.com. All returned service items whether under warranty or
not, must be freight pre-paid and accompany a return authorization
(R.A.) number. If the unit is under warranty you must provide a copy
of your proof of purchase invoice. Please contact American DJ® cus-
tomer support for a R.A. number.
The unit should be mounted using a mounting clamp (not provided),
axing it to the mounting bracket that is provided with the unit.
Always ensure that the unit is rmly xed to avoid vibration and slip-
ping while operating. Always ensure that the structure to which you
are attaching the unit is secure and is able to support a weight of 10
times the unit’s weight. Also, always use a safety cable that can hold
12 times the weight of the unit when installing the xture.
The equipment must be installed by a professional, and it must be
installed in a place where it is out of the reach of people’s grasp.
FREQ 16 Strobe Installation
Produktspecifikationer
| Varumärke: | Adj |
| Kategori: | ej kategoriserat |
| Modell: | FREQ 16 Strobe |
Behöver du hjälp?
Om du behöver hjälp med Adj FREQ 16 Strobe ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Adj Manualer
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
ej kategoriserat Manualer
- Braun
- Universal Audio
- Gentex
- HP
- WES Audio
- Fresh N Rebel
- Milwaukee
- Burris
- Posiflex
- RCA
- Steinberg
- Rane
- Oben
- Tascam
- The T.bone
Nyaste ej kategoriserat Manualer
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025