Aiphone IXW-HWCBP Bruksanvisning
Aiphone
internt kommunikations system
IXW-HWCBP
Läs gratis den bruksanvisning för Aiphone IXW-HWCBP (4 sidor) i kategorin internt kommunikations system. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 8.5 recensioner. Har du en fråga om Aiphone IXW-HWCBP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
IXW-HWCBP
Hand Wave Call Button and Surface Mount Box
IXW-HWCBP includes a touchless switch attached to a mounting plate, a PS-POE, and the SBX-2G/A
surface mount box. This device can be connected to any IX Series door station with a trigger input and a PoE
passthrough. It will place calls to the programmed station without having to touch the call button. The touchless
switch is powered by the PS-POE. The switch’s contact output will trigger a contact input on the door station. The
contact input will need to be programmed and assigned to a calling group. This instruction manual will show how
to connect the IXW-HWCBP to the door station and program the door station for contact input calling.
Wiring
A PoE+ switch is required when using the IXW-HWCBP. Connect a network cable from the PoE+ switch to LAN
1 of the IX Series door station. LAN 2 connects to the included PS-POE. Connect the power output of the
PS-POE to the red (+VDC) and black (Gnd) wires of the touchless switch. Connect the green (N/O) and yellow
(Common) wires of the touchless switch to contact input 1 on the IX Series door station (brown/blue wires on
CN2).
- Instructions -
Specifi cations
Dimensions: 4-¹³ " H x 4- " W x 4" D⁄ ⁷ ⁄
Package Contents
Qty 1 Panel with touchless switch
Qty 1 SBX-2G/A
Qty 1 PS-POE
Qty 4 speed nuts for panel mounting
Qty 4 screws for panel mounting
Qty 1 three-foot patch cable
Installation
1. Secure SBX-2G/A to wall
2. Connect included patch cable, power wires, and
a ground wire to PS-POE and place unit
inside the SBX-2G/A
3. Connect included patch cable to LAN 2 of IX
series door station
3. Connect touchless switch to input of IX series
door station and PS-POE
- Green (N.O.) to Brown (CN2 of IX-DV)
- Yellow (Common) to Blue (CN2 of IX-DV)
- White (N.C.) not used
- Red (+VDC) to + of PS-POE
- Black (GND) to - of PS-POE
4. Secure switch panel to SBX-2G/A
Back View
PoE+ Switch
Cat-5e / Cat-6
PS-POE
PoE IN
- +
N.C. (not used)
Red = +VDC
Black =Gnd
,;'9
IX-DV
IXW-HWCBP
If a PoE passthrough is
not available, connect
the PS-POE directly to
the PoE switch
Patch cable supplied
IXW-HWCBP Instr
0321
Aiphone Corporation
www.aiphone.com
tech@aiphone.com
800-692-0200
Produktspecifikationer
| Varumärke: | Aiphone |
| Kategori: | internt kommunikations system |
| Modell: | IXW-HWCBP |
Behöver du hjälp?
Om du behöver hjälp med Aiphone IXW-HWCBP ställ en fråga nedan och andra användare kommer att svara dig
internt kommunikations system Aiphone Manualer
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
internt kommunikations system Manualer
Nyaste internt kommunikations system Manualer
12 Oktober 2025
12 Oktober 2025
11 Oktober 2025
11 Oktober 2025
11 Oktober 2025
9 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025