Altair Carani 52665-BAT-WH-FB Bruksanvisning

Altair badkar Carani 52665-BAT-WH-FB

Läs gratis den bruksanvisning för Altair Carani 52665-BAT-WH-FB (4 sidor) i kategorin badkar. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 8.5 recensioner. Har du en fråga om Altair Carani 52665-BAT-WH-FB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
B) Protect your Tub.
Before commencing and installation, ensure the Tub is completely protected, leave covering
in place until the bathroom is complete. Scratches and damage incurred during installation
are not covered by the warranty.
TOOLS REQUIRED FOR INSTALLATION
51167-BAT-WH-FB
Spirit Level Wrench Tape Marking Pencil Silicone Gun
Step 1
This can be done by turning the feet bars accordingly;
Then use wrench to tighten the nuts on the bars.
See figure 1
IMPORTANT:
* Two people are required for installation.
* Freestanding tub is not designed to take weight on the rim.
Do not sit or stand on the tub rim.
Figure 1
Receive Your Tub
Feet set at 3mm above the floor
A) Unpack and check for damage.
After receiving your tub, please unpack and remove all covering, checking whether there is
any damage. Repack the tub if it is not being immediately installed. It will be rejected any
claim for damage if not notified in a timely manner.
Step 2
Mark the floor with the outline of the tub, at the final installation position with the marking
pencil.
Please retain this manual after installation for future reference and
maintenance
Product must be installed in compliance with relevant Water Bylaws
52665-BAT-WH-FB
Altair Inc.


Produktspecifikationer

Varumärke: Altair
Kategori: badkar
Modell: Carani 52665-BAT-WH-FB

Behöver du hjälp?

Om du behöver hjälp med Altair Carani 52665-BAT-WH-FB ställ en fråga nedan och andra användare kommer att svara dig