Apart PA2240BP Bruksanvisning

Apart mottagare PA2240BP

Läs gratis den bruksanvisning för Apart PA2240BP (8 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 1.5 recensioner. Har du en fråga om Apart PA2240BP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
1
6
23
45 2 3
45
1. Power switch
To turn the power on and off.
2. Overload indicator CH1 & CH2
This red LED illuminates when one of the protections have been activated. No sound will be heard
anymore. This will be in case of overheating being the result of drawing too much power from your
amplier or the impedance connected is below the minimum load impedance.
See also point 17 “bass control”.
3. Level indicators/clip-limit CH1 & CH2
The bottom LED will light green after powering on. To work under normal conditions the volume
indicator should be kept under 0dB. At +4dB a limiter will be activated. This red LED indicates that the
“auto gain circuit” reduces the level below clipping. This can be bypassed by qualied personnel only
(see jumper inside), but voids the guarantee and the LED will continue to icker.
This is NOT a clip indicator!
When the overheating protection circuit is active, the level indicators will all go dark. If this occurs
regularly, check the total load impedance and make sure the airow around the amplier is
not obstructed.
4. Prior LED CH1 & CH2
This yellow LED will illuminate when the prior input has been selected by means of the priority input
contact (see 11b). In bridge mode only the indication of CH1 are valid.
5. Program LED CH1 & CH2
This green LED tells you that the ‘program’ input is active.
6. Bridged LED
This yellow LED tells you when the amplier is in BRIDGE mode (= 480Watts)
Connect a sound source to the program or priority input 2 in bridge mode.

Produktspecifikationer

Varumärke: Apart
Kategori: mottagare
Modell: PA2240BP
Färg på produkten: Zwart
Förpackningens bredd: 576 mm
Djuppackning: 148 mm
Förpackningshöjd: 468 mm
Justerbar i höjdled: Nee
Beeldscherm: LED
Skärm diagonal: 21.5 "
Upplösning: 1920 x 1080 Pixels
Pekskärm: Nee
Original bildförhållande: 16:9
Videolägen som stöds: 1080p
Betraktningsvinkel, horisontell: 170 °
Betraktningsvinkel, vertikal: 160 °
Medföljande kablar: AC, Audio (3.5mm), VGA
Typiskt kontrastförhållande: 1000:1
Snabbstartsguide: Ja
Frekvensområde horisontellt: 30 - 83 kHz
Frekvensområde vertikalt: 50 - 76 Hz
VGA (D-Sub) port(ar): 1
Monteringsalternativ för kabellås: Ja
Kabellåsspårtyp: Kensington
Inbyggda högtalare: Ja
Genomsnittlig effekt: 2 W
Strömförbrukning (i standby): 0.5 W
Antal högtalare: 2
Certifiering: CEL, UL/cUL, CB, CE, ErP, FCC, CCC, BSMI, Gost-R, C-Tick, VCCI, PSB, J-MOSS, RoHS, WEEE
Display, antal färger: 16.78 miljoen kleuren
Strömförbrukning (när avstängd): 0.5 W
HD typ: Full HD
3D: Nee
Respons tid: 5 ms
Pixelpitch: 0.248 x 0.248 mm
Grafikupplösningar som stöds: 1920 x 1080 (HD 1080)
VESA montering: Ja
Panelmonteringsgränssnitt: 100 x 100 mm
DVI-D-portar: 1
Hållbarhetscertifikat: ENERGY STAR
Ljusstyrka (typiskt): 250 cd/m²
Bildförhållande: 16:9
Digital horisontell frekvens: 30 - 83 kHz
Digital vertikal frekvens: 50 - 76 Hz
Kontrastförhållande (dynamisk): 80000000:1
Integrerad TV-tuner: Nee
Inbyggd kamera: Nee
Djup (utan bas): 56.9 mm
Höjd (utan bas): 305.51 mm
Bredd (utan bas): 512.84 mm
Vikt (utan bas): 4100 g
Enhetsbredd (med stativ): 512.84 mm
Djupenhet (med stativ): 201.82 mm
Enhetshöjd (med stativ): 385.96 mm
Tunn klient installerad: Nee
AC-ingångsspänning: 100 - 240 V
AC-ingångsfrekvens: 50 - 60 Hz
Strömförbrukning (typiskt): 35 W
Tiltvinkelområde: -5 - 20 °

Behöver du hjälp?

Om du behöver hjälp med Apart PA2240BP ställ en fråga nedan och andra användare kommer att svara dig