Apc AP7532 Bruksanvisning

Apc Växla AP7532

Läs gratis den bruksanvisning för Apc AP7532 (1 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 5.5 recensioner. Har du en fråga om Apc AP7532 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
*990-2395*
990-2395 05/2005
Addendum — Rack PDU
Circuit Breaker Operation
How to reset a mid-tripped circuit breaker
The circuit breaker is at a mid-trip state when the
actuator is partially extended from the circuit
breaker, but not fully extended, as if it had been
turned off manually. Pushing the actuator in while
in mid-trip state will not reset the breaker. The
circuit breaker needs to be fully extended before it
can be reset. To fully extend the circuit breaker:
1. Insert a small slotted screwdriver or other tool
into the hole located above the word “OFF”.
2. Push the lower part of the actuator in gently
until the upper part “clicks” out.
How to reset a circuit breaker
The circuit breaker is ready to be reset when the
actuator is fully extended. Quickly and forcefully
push the circuit breaker actuator into the PDU to
reset the breaker.
pdu0346a
Note
Before resetting the circuit breaker you
should determine the cause of the fault
and remedy the fault before resetting
the circuit breaker. If the fault is not
removed, the breaker will trip again as
soon as it is reset.
pdu0345a

Produktspecifikationer

Varumärke: Apc
Kategori: Växla
Modell: AP7532

Behöver du hjälp?

Om du behöver hjälp med Apc AP7532 ställ en fråga nedan och andra användare kommer att svara dig