Apc BAT SMT + 750VA Bruksanvisning

Apc UPS BAT SMT + 750VA

Läs gratis den bruksanvisning för Apc BAT SMT + 750VA (14 sidor) i kategorin UPS. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 3.5 recensioner. Har du en fråga om Apc BAT SMT + 750VA eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/14
990-1587A 12/2005
User Manual English
1
Introduction
The APC Uninterruptible Power Supply (UPS) is designed to prevent blackouts, brownouts, sags,
and surges from reaching your equipment. The uninterruptible power supply (UPS) filters small util-
ity line fluctuations and isolates your equipment from large disturbances by internally disconnecting
from the utility line. The UPS provides continuous power from its internal battery until the utility
line returns to safe levels or the battery is fully discharged.
1: INSTALLATION
The User Manual and Safety Guide are accessible on the supplied User Manuals CD and on the
APC web site, www.apc.com.
Unpack
Attention: Read the safety instruction sheet before installation.
Inspect the UPS upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents:
Attention: The UPS comes with battery disconnected.
! UPS
! UPS literature kit containing:
! Product documentation, safety and warranty information
! Smart-UPS User Manuals CD
! 120V and 230V models: PowerChute® CD
! 120V and 230V models: Serial and USB communication cables
! 230V model: Two jumper cables
Position the UPS
Connect the Battery
The battery connector is located on the rear panel.
For battery connection, push the tethered jumper plug
into the corresponding port.
0-95%
1 in (2.5 cm)
0-40°C

Produktspecifikationer

Varumärke: Apc
Kategori: UPS
Modell: BAT SMT + 750VA

Behöver du hjälp?

Om du behöver hjälp med Apc BAT SMT + 750VA ställ en fråga nedan och andra användare kommer att svara dig