Apc E3SOPT010 Bruksanvisning

Läs gratis den bruksanvisning för Apc E3SOPT010 (4 sidor) i kategorin UPS. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2 recensioner. Har du en fråga om Apc E3SOPT010 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Installation 990-6486-001 3/2021

Easy UPS 3S Dry Contact I/O SmartSlot Card

(E3SOPT010)

NOTE: Only one dry contact I/O SmartSlot card can be installed in theUPS.

Characteristics of output contacts (pin 3, 5 – 9):

•Permissible voltage: 24 V

•Permissible current: 1 A

Definitions of Output Contacts (Pin 3,5 – 9)

PinPin nameDescription

3 Utility/mains

unavailable

Utility/mains is unavailable.

Active: low

5UPS onUPS is in normalmode.

Active: low

6Battery lowBattery voltage reaches EOD.

Active: low

7General alarmUPS gives off general alarm such as input out of

tolerance, batterylow, manualbypass,or output

overload.

Active: low

8Bypass activeorNo

output

UPSis in bypass mode, or there is no output powerto

load.

Active: low

9UPS inoperableUPS isinoperableincasesofRECinoperable,INV

inoperableor Bypassinoperable.

Active: low

Characteristics of input contact (pin 4):

NOTE: Do not duplicate the settings of the internal configurable dry contactor

(standard in the UPS) on pin 4 to shut down the UPS.

•Permissible voltage: 24 V

•Permissible current: 80 mA

•Reverse max voltage: 6 V

Definitions of Input Contact (Pin 4)

PinPin nameDescription

4Shut down UPSUPScan be shut down by energizing thispin with

external power supply for at least two seconds.

Schneider Electric

35rue JosephMonier

92500 Rueil Malmaison

France

+33 (0) 1 41 29 70 00

www.se.com

Asstandards, specifications,anddesign

change fromtime to time, please ask for

confirmation of the information given in this

publication.

©2021 –2021.AllrightsSchneider Electric

reserved.

Produktspecifikationer