Apc ER7SHELFS Bruksanvisning


Läs gratis den bruksanvisning för Apc ER7SHELFS (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 9.5 recensioner. Har du en fråga om Apc ER7SHELFS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Installation 990–91513 Release date: 02/2021
Easy Rack Accessory Short Shelf Kit ER7SHELFS
Kit Instructions
The 1U, Accessory Short Shelf can be installed to the vertical mounting rails in an
empty space in the Easy Rack to support your equipment.
ER7SHELFS Inventory Tools Required (not provided)
Shelf (1)
Torx® wrench
M6 x 12 Pan Head T30 Screw (8) Cage nut tool
Cage Nut M6 14/16 SWG (8)
Proper location in the rack for the cage nuts:
1U
7
6
5
ns0014a
1. Locate the top and bottom U space on the vertical
mounting rails. Every third hole on the mounting rails
is numbered to indicate the middle of a U space.
2. Install the cage nuts on the interior of the vertical
mounting rail; then install the shelf.
CAUTION
FALLING EQUIPMENT HAZARD
Do NOT install cage nuts vertically with the tabs engaging the top and bottom of
the square hole.
Failure to follow these instructions can result in injury or equipment
damage.
APC by Schneider Electric
70 Mechanic Street
02035 Foxboro, MA
USA
www.apc.com
As standards, specifications, and design
change from time to time, please ask for
confirmation of the information given in this
publication.
© – 2021 . All rightsAPC by Schneider Electric
reserved.


Produktspecifikationer

Varumärke: Apc
Kategori: Inte kategoriserad
Modell: ER7SHELFS

Behöver du hjälp?

Om du behöver hjälp med Apc ER7SHELFS ställ en fråga nedan och andra användare kommer att svara dig