Apc NetBotz AP9335T Bruksanvisning

Apc Inte kategoriserad NetBotz AP9335T

Läs gratis den bruksanvisning för Apc NetBotz AP9335T (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2.5 recensioner. Har du en fråga om Apc NetBotz AP9335T eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Temperature Sensor (AP9335T)
Installation Instructions
Inventory
Installation
Caution: To avoid damaging the sensor, do not use a tie wrap or wire clip directly on the
sensor when securing it. Use a tie wrap or wire clip, as shown in these instructions, about
half an inch from the end of the sensor.
Note: Use adhesive cable tie holders, tie wraps, and wire clips to secure the sensor cable.
3.96-m (13-ft) temperature sensor (1)
#6 x 3/4-in sheet
metal screw (1)
#8 wall anchor (1)
203-mm (8-in) tie wrap (5) 19-mm x 19-mm (3/4-in x 3/4-in)
adhesive cable tie holder (3)
Wire clip (6)
Customer support and warranty information is available at our Web site, www.apc.com.
© 2010 Schneider Electric. All rights reserved. The Schneider Electric logo is owned by Schneider
Electric Industries, S.A.S., or its affliliated companies.
990-3505A
03/2010
Vertical rail
Door
Wall

Produktspecifikationer

Varumärke: Apc
Kategori: Inte kategoriserad
Modell: NetBotz AP9335T

Behöver du hjälp?

Om du behöver hjälp med Apc NetBotz AP9335T ställ en fråga nedan och andra användare kommer att svara dig