Arkon MG002WR Bruksanvisning

Läs gratis den bruksanvisning för Arkon MG002WR (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 11.5 recensioner. Har du en fråga om Arkon MG002WR eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
MG002WR | Mobile Grip 2 Universal Smartphone Holder with Tightening Ring
rev.052914
Consumer Hotline:
USA (800) 841-0884
INT’L (626) 254-9005
Monday - Friday 9am - 5pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China
The Mobile Mounting Specialists
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsibil-
ity of liability for injury or death as a result of car crashes and / or air
bag deployment.
Arkon is not responsible for any damages caused to your vehicle, your
device, or yourself due to the installation or use of this mount.
!
Adjust the pedestal to the desired position and tighten the
adjustment ring to set.
Insert device by pushing against the spring loaded support leg. Unscrew cord catcher to reveal ¼”-20 pattern. Screw Mobile Grip 2
Universal Holder directly onto any tripod or holder (sold separately, not
included) with a 1/4”-20 mounting bolt.
2
Package Contents:
(1) MG002 – Mobile Grip 2 Universal Smartphone Holder
(1) SP-SB-RING – Tightening Ring
1
MG002 SP-SB-RING
Using the Mobile Grip with a 17mm Mounting Ball
Mount Directly onto ¼-20 mounting pattern Inserting a Device into the Mobile Grip Holder
Adjustment Ring
Place adjustment ring over the pedestal ball of any mount with
a 17mm ball adapter (sold separately, not included). Snap Mobile
Grip 2 Universal Holder onto the pedestal.

Produktspecifikationer

Varumärke: Arkon
Kategori: Inte kategoriserad
Modell: MG002WR

Behöver du hjälp?

Om du behöver hjälp med Arkon MG002WR ställ en fråga nedan och andra användare kommer att svara dig