Arkon RCBTABLED Bruksanvisning


Läs gratis den bruksanvisning för Arkon RCBTABLED (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 27 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 14 recensioner. Har du en fråga om Arkon RCBTABLED eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Telescoping pole extends
upward from 17 inches to
29 inches.
Compatibility:
Fits smartphones with
cases weighing up to 2
pounds and measuring
up to 4” wide.
IMPORTANT:
Overtightening may
damage threads on
holder and also make it
difficult to adjust phone
and tablet holders.
3 4
2
Insert pole into base.
PLEASE NOTE—this will be a tight fit and will require some force.
Your Remarkable Creators Bundle will arrive in eight pieces:
Telescoping Pole
25mm to 1/4”-20
Camera Bolt Adapter
(optional)
Weighted Base
with Allen Wrench
1
RV B
Attach overhead arm assembly by un
the pole until
Unscrew tightening ring from holder.
Place ring over the 17mm end of mount
then snap the holder onto the ball. Set to
desired position, then tighten ring.
Using two hands, insert phone into the
holder by pushing the device into one of the
spring-loaded support arms. Expand the other
support arm and fully insert device until it lays
flat against the blue rubber pad.
SP25MMCAM
Assembled Mount
S 0
SPHD8BASE
SPHD8L29
Tighten clockwise
to secure.
Tighte
Teles
Pol
Tightening
Knob
Collar
M al
de
Continued on page 2
RCBTABLED | Remarkable Creators Video Phone Stand Bundle
rev.053118
SPHD8L29
SPHD8BASE
Phone Holder
LED Ring Light
RV001WR-B
Overhead Arm
Assembly
SP3RMPR0
Clamp Post Mount
GN031-SBH-B
SPLEDRING
TAB001
GN031-SBH-B
5
Shafts can be adjusted by unscrewing
the shafts’ knobs to loosen. Tighten
knobs to set.
Tablet Holder
TAB001


Produktspecifikationer

Varumärke: Arkon
Kategori: Inte kategoriserad
Modell: RCBTABLED

Behöver du hjälp?

Om du behöver hjälp med Arkon RCBTABLED ställ en fråga nedan och andra användare kommer att svara dig