ART SLA-2 Bruksanvisning

ART mottagare SLA-2

Läs gratis den bruksanvisning för ART SLA-2 (16 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 37 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 19 recensioner. Har du en fråga om ART SLA-2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/16
SLA-2
TWO CHANNEL STUDIO LINEAR
AMPLIFIER
User's Manual
-1-
IMPORTANT SAFETY INSTRUCTIONS – READ FIRST
This symbol, whenever it appears, alerts you This symbol, wherever it appears, alerts
to the presence of uninsulated dangerous you to important operating and maintenance
voltage inside the enclosure. Voltage that instructions in the accompanying literature.
Read instructions: Retain these safety and operating instructions for future reference. Heed all warnings
printed here and on the equipment. Follow operating instructions printed in this user guide.
Do not open: There are no user serviceable parts inside. Refer any service work to qualified technical
personnel only.
Power sources: Only connect unit to mains power of type marked on rear panel. Power source must
provide a good ground connection.
Power cord: Use the power cord with sealed mains plug appropriate for your local mains supply as
provided with the equipment. If the provided plug does not fit into your outlet consult your service agent.
Route the power cord so that it is not likely to be walked on, stretched or pinched by items placed upon or
against.
Grounding: Do not defeat the grounding and polarization means of the power cord plug. Do not remove
or tamper with the ground connection on the power cord.
Ventilation: Do not obstruct the ventilation slots or position the unit where the air required for ventilation is
impeded. If the unit is to be operated in a rack, case or other furniture ensure that it is constructed to allow
adequate ventilation.
Moisture: To reduce the risk of fire or electrical shock do not expose the unit to rain, moisture, or use in
damp or wet conditions. Do not place a container of liquid on it, which may spill into any openings.
Heat: Do not locate the unit in a place close to excessive heat or direct sunlight, as this could be a fire
hazard. Locate the unit away from any equipment, which produces heat such as: power supplies, power
amplifiers and heaters.
Environment: Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid
tobacco ash, drink spillage and smoke, especially that associated with smoke machines.
Handling: To prevent damage to the controls and cosmetics avoid rough handling and excessive
vibration. Protect the controls from damage during transit. Use adequate padding if you need to ship the
unit. To avoid injury to yourself or damage to the equipment take care when lifting, moving or carrying the
unit.
Servicing: Switch off equipment and unplug the power cord immediately if it is exposed to moisture,
spilled liquid, objects fallen into opening, the power cord or plug becomes damaged during a lightning
storm, or if smoke odor or noise is noted. Refer servicing to qualified technical personnel only.
Installation: Install the unit in accordance with the instruction printed in the user guide.
2

Produktspecifikationer

Varumärke: ART
Kategori: mottagare
Modell: SLA-2

Behöver du hjälp?

Om du behöver hjälp med ART SLA-2 ställ en fråga nedan och andra användare kommer att svara dig