Artsound CLMN8 Bruksanvisning
Sidor 2 Nederlands högtalare
Läs bruksanvisningen för Artsound CLMN8 gratis online eller ladda ner PDF:en. 26 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
CLMN8
OPERATIONS
MANUAL
WARRANTY CONDITIONS
2 years of warranty from the manufacturing date.
The warranty is limited to repair or exchange of the
defective material insofar this is a consequence of
normal use and the device has not been damaged.
ArtSound is not responsible for any other costs
deriving from the defect (e.g. transport). For any
details, we refer to the general conditions of sale.
TECHNICAL SPECIFICATIONS
• range : <60m
2
• 2-way/broadband system 8+1
• driver, neodymium-magnet :
2” polypropylene cone
• tweeter, neodymium-magnet : 1” soft dome
• magnetic shielded
• max. power (100V) : 6 -15-30 W
• max. power (8) : 40-180 WΩ
• sensibility : 91dB
• frequency range : 120Hz - 20kHz
• dimensions (h x w x d) : 578 x 70 x 75mm
• weight / piece : 2.23 kg
• housing : aluminium
• black / white
• suspension : multi-directional bracket
Dear customer, thank you and congratulations on
the purchase of your speakers(s). If you read the
following instructions and keep them, you will be
able to enjoy them for a long time!
SAFETY INSTRUCTIONS
• A CLMN8 cannot swim. Please keep it away
from water and all types of moisture.
• Ensure that your amplifier is disconnected while
connecting your speaker(s).
• Power cables and audio cables had best be
kept away from the speaker cables as much as
possible.
• Ensure that your amplifier is disconnected while
connecting your speaker(s).
• Ensure that the total capacity of all speakers is
lower than that of the amp.
• Assemble the CLMN8 only using the included
bracket and fitting screws.
• People only have one set of ears, treat them
carefully. Prolonged exposure to a high volume
may cause damage.
• When in doubt about the positioning or the use
of the speakers, ask help from an audio expert
in advance.
3 x
4 x
INSTALLATION
A
B
C
34 mm
34 mm
50 mm
92 mm
6 mm
12
A
A
A
BB
12- Deduplicate the bracket. - Assemble part A of the bracket to the wall by
use of screws.
3
CB
3- Assemble part B of the bracket to the speaker
(C) using the included screws.
4- Connect the speaker cable [+/-] via the
connecting terminal and select the desired
capacity (in a 100 V environment or 8 Ohm in
case of residential use).
+
-
RED
BLACK
30W
15W
6W
0
8Ω
4
Produktspecifikationer
| Varumärke: | Artsound |
| Kategori: | högtalare |
| Modell: | CLMN8 |
Behöver du hjälp?
Om du behöver hjälp med Artsound CLMN8 ställ en fråga nedan och andra användare kommer att svara dig
högtalare Artsound Manualer
Artsound ASW65.2 Bruksanvisning Artsound PSW525 Bruksanvisning Artsound AS-A80.2 Bruksanvisning Artsound PWR09 Bruksanvisning Artsound RE2040 Bruksanvisning Artsound UNI40T Bruksanvisning Artsound ASW45.2 Bruksanvisning Artsound SQ2040 Bruksanvisning
Alla Artsound högtalare manualer
Populära i högtalare
högtalare Manualer
Nyaste högtalare Manualer
Martin Logan Foundation F1 Bruksanvisning Martin Logan Foundation F2 Bruksanvisning Martin Logan Statement 40XW Bruksanvisning Martin Logan IC8 Bruksanvisning Newell induOne MagPlay Bruksanvisning Lexon Mino X Bruksanvisning Match UP C42-BMWFRT.1 Bruksanvisning LG XBOOM Go DXG9Q Bruksanvisning Match UP W8MB-S4 Bruksanvisning Defender Solar 7 Bruksanvisning