Ashdown Engineering Original HD-1 Bruksanvisning
Ashdown Engineering
mottagare
Original HD-1
Läs gratis den bruksanvisning för Ashdown Engineering Original HD-1 (5 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 8.5 recensioner. Har du en fråga om Ashdown Engineering Original HD-1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
The Origin clinches the key fundamentals of everything that makes a great bass amp. This
lightweight, portable and stripped back bass amp head takes Ashdown back to the Origin of their
Tone.
Starting from the top, a passive/active switch determines the whether the amp is being used with
a high or low output instrument and sets a clear signal path to the input control. From here, the
player can ne-tune their input level using Ashdown’s trademark VU meter, which takes pride of
place at the very centre of the amp head.
Simple yet Powerful EQ
With the signal at its optimal level, you then hit a dened set of features designed enhance your
tone. The Origin features a tried and tested 5-band EQ, controlling your traditional bass, middle
and treble with a lo-mid and hi-mid sitting comfortably either side of the variable middle control.
The additional Shape control further sculpts your tone, lifting the frequencies that really count –
like a smiley face on a graphic equalizer.
Tonally Connected
The output control regulates the output volume of the amp and wrapping up the features on the
front panel is an easy to reach DI output, as well as an independent FX send and return, which
allows the amp to set a very clear signal path with no interruptions.
Create the Perfect Rig
To the rear of this condensed unit is a very well considered headphone out, which doubles this
gig-ready head as a great home practice device. 2 x jack speaker outputs with a minimum 4 ohm
load provides exible partnering options with Ashdown’s existing range of bass cabinets.
USER GUIDE
ASHDOWN ORIGIN HEAD & COMBOSAL
Front Panel:
1-
FX-RTN - FX loop return jack socket.
2-
FX-SEND - FX loop send jack socket.
3-
IN - Instrument Input Jack
4-
SHAPE - Push Button - Enables a pre shape
scoop to the tone before the EQ.
5-
PASSIVE/ACTIVE - Push Button - Passive or
active instrument -15dB input PAD.
6-
INPUT - Rotary Control - Adjust the input level
depending on your choice of instrument.
7-
VU METER - Input level meter for input signal
monitoring.
8-
OUTPUT - Rotary control - Set the overall
output of your amp.
9-
DI OUT - Balanced XLR Di Output
10-
SAFE - LED - Safe operation indicator
11-
PROTECT - LED - Safety precaution indicator.
12-
EQ - A 5 band comprehensive EQ action.
Including rotary controls for Bass, Lo-Mid,
Middle, Hi-Mid and Treble.
USER GUIDE
ASHDOWN ORIGIN HEAD & COMBOSAL
Produktspecifikationer
| Varumärke: | Ashdown Engineering |
| Kategori: | mottagare |
| Modell: | Original HD-1 |
Behöver du hjälp?
Om du behöver hjälp med Ashdown Engineering Original HD-1 ställ en fråga nedan och andra användare kommer att svara dig
mottagare Ashdown Engineering Manualer
8 September 2024
31 Augusti 2024
29 Augusti 2024
28 Augusti 2024
28 Augusti 2024
28 Augusti 2024
27 Augusti 2024
27 Augusti 2024
mottagare Manualer
- CYP
- FiveO
- Winegard
- Mobile Crossing
- Onkyo
- Bluesound
- Rocketfish
- Unison Research
- Blaupunkt
- Crest Audio
- IOTAVX
- Bose
- Monacor
- BC Acoustique
- Shinybow
Nyaste mottagare Manualer
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025