Asrock H81TM-ITX Bruksanvisning

Asrock moderkort H81TM-ITX

Läs nedan 📖 manual på svenska för Asrock H81TM-ITX (159 sidor) i kategorin moderkort. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/159
Version 1.0
Published December 2013
Copyright©2013 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Website: http://www.asrock.com
H81TM-ITX
1
English
Motherboard Layout
Intel
H81
PCIE1
MINI_PCIE1
CMOS
Battery
CHA _F AN1
USB4 _5
1
SATA_POW1
LVDS1
DDR3_B1
DDR3_A1
HDL ED ESET R
PL ED P WRBT N
PANEL1
1
BKT _ PW R1
1
PNL _PW R1
1
USB2_ 3
1
1
HDMI_ SPDIF1
1
HD_ AUDIO1
AUDIO
CO DEC
LAN
SATA_1
CPU_FA N1
32Mb
BIOS
DMIC 1
1
CL RCMO S1
1
1
Front
Speaker
Mic In
US 2.B 0
T: USB0
B: USB1
RJ-45
US 3.B 0
T: USB0
B: USB1
DC Jack
DVI1
HDMI1
CIR 1
1
H81TM-ITX
Ro HS
1
HT PC 1
BLT _ VOL 1
1
CO M1
1
SPEA KER1
1
1
HD_ AUDIO2
LPC1
1
SATA_0
PLED1
1
32 4 5 6 7 8
11
13
14
12
15
1718
19
20
21
22
24
23
US B 3.0
16
10
9
2
English
No. Description
1 Power LED Header (PLED1)
2 SATA3 Connector (SATA_1)
3 Chassis Fan Connector (CHA_FAN1)
4 Consumer Infrared Module Header (CIR1)
5 SATA3 Connector (SATA_0)
6 USB 2.0 Header (USB4_5)
7 SATA Power Connector (SATA_POW1)
8 System Panel Header (PANEL1)
9 Backlight Power Jumper (BKT_PWR1)
10 Panel Power Jumper (PNL_PWR1)
11 LVDS Connector (LVDS1)
12 2 x 204-pin DDR3 SO-DIMM Slots (DDR3_A1, DDR3_B1)
13 Backlight & Amp Volume Control Header (BLT_VOL1)
14 COM Port Header (COM1)
15 USB 2.0 Header (USB2_3)
16 CPU Fan Connector (CPU_FAN1)
17 Digital MIC Header (DMIC1)
18 SPDIF Out Connector (HDMI_SPDIF1)
19 Front Panel Audio Header (HD_AUDIO1)
20 Analog Surround Audio Header (HD_AUDIO2)
21 3W Audio AMP Output Wafer Header (SPEAKER1)
22 Home eater PC Header (HTPC1)
23 Clear CMOS Jumper (CLRCMOS1)
24 LPC Debug Header (LPC1)
H81TM-ITX
3
English
I/O Panel
No. No.Description Description
1 DC Jack* 5 LAN RJ-45 Port**
2 USB 3.0 Ports (USB3_01) 6 USB 2.0 Ports (USB01)
3 7DVI-I Port (DVI1) Microphone (Pink)
4 8 Front Speaker (Lime)HDMI Port (HDMI1)
* Please use a 19V power adapter for the DC jack. is jack accepts dual barrel plugs with an inner diameter of 5.1
mm and an outer diameter of 7.4 mm, where the inner contact is +19 (±10%) VDC and the shell is GND.
DELTA DELTA-ADP-150TB-150W/19V
HP HP-TBC-BA52-150W/19V
FSP FSP-FSP150-ABAN1-150W/19V
** ere are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
Activity / Link LED Speed LED
Status StatusDescription Description
O ONo Link 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection
ACT/LINK LED
SPEED LED
LAN Port
8762 5431
6
English
• Supports LVDS with max. resolution up to 1920x1200 @
60Hz
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
HBR (High Bit Rate Audio) with HDMI Port (Compliant
HDMI monitor is required)
• Supports HDCP function with HDMI
• Supports Full HD 1080p Blu-ray (BD) playback with HDMI
Audio • 7.1 CH HD Audio with Content Protection (Realtek ALC892
Audio Codec)
• Premium Blu-ray audio support
LAN • Gigabit LAN 10/100/1000 Mb/s
• Giga PHY Intel® I217V
• Supports Intel® Remote Wake Technology
• Supports Wake-On-LAN
• Supports Energy Ecient Ethernet 802.3az
• Supports PXE
Rear Panel
I/O
• 1 x DC Jack
• 1 x DVI-I Port
• 1 x HDMI Port
• 2 x USB 2.0 Ports
• 2 x USB 3.0 Ports
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
• HD Audio Jacks: Front Speaker / Microphone
Storage • 2 x SATA3 6.0 Gb/s connectors, support NCQ, AHCI and Hot
Plug
Connector • 1 x CIR Header
• 1 x COM Port Header
• 1 x SPDIF Out Connector
• 1 x Backlight Power Jumper
• 1 x Panel Power Jumper
• 1 x Backlight & Amp Volume Control Header
8
English
Due to limitation, the actual memory size may be less than 4GB for the reservation for sys-
tem usage under Windows® 32-bit operating systems. Windows® 64-bit operating systems
do not have such limitations. You can use ASRock XFast RAM to utilize the memory that
Windows® cannot use.
12
English
is is a in Mini-ITX form factor motherboard. Before you install the
motherboard, study the conguration of your chassis to ensure that the
motherboard ts into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard.
Failure to do so may cause physical injuries to you and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.
Chapter 2 Installation
14
English
4
5
3
H81TM-ITX
15
English
Please save and replace the cover if the processor is removed. e cover must be placed if
you wish to return the motherboard for aer service.
H81TM-ITX
17
English
2.3 Installing Memory Modules (SO-DIMM)
is motherboard provides two 204-pin DDR3 (Double Data Rate 3) SO-DIMM
slots.
e SO-DIMM only ts in one correct orientation. It will cause permanent damage to
the motherboard and the SO-DIMM if you force the SO-DIMM into the slot at incorrect
orientation.
It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot; otherwise,
this motherboard and SO-DIMM may be damaged.
18
English
1
2
H81TM-ITX
19
English
2.4 Expansion Slots (PCI Express Slots)
ere is 1 PCI Express slot and 1 mini PCI Express slot on this motherboard.
PCIe slot:
PCIE1 (PCIe 2.0 p20-x4 slot) is used for PCI Express p20-x4 lane width cards.
mini-PCIe slot:
MINI_PCIE1 (mini-PCIe slot) is used for WiFi module.
Before installing an expansion card, please make sure that the power supply is switched o
or the power cord is unplugged. Please read the documentation of the expansion card and
make necessary hardware settings for the card before you start the installation.
H81TM-ITX
21
English
2.6 Onboard Headers and Connectors
System Panel Header
(9-pin PANEL1)
(see p.1, No. 8)
Connect the power
switch, reset switch and
system status indicator on
the chassis to this header
according to the pin
assignments below. Note
the positive and negative
pins before connecting
the cables.
Power LED Header
(3-pin PLED1)
(see p.1, No. 1)
Please connect the chassis
power LED to this header
to
indicate the system’s
power status.
GND
R #ES ET
PW RB TN #
PL ED -
PL ED +
GND
HDLED-
HDLED+
1
GND
PWRBTN (Power Switch):
Connect to the power switch on the chassis front panel. You may congure the way to turn
o your system using the power switch.
RESET (Reset Switch):
Connect to the reset switch on the chassis front panel. Press the reset switch to restart the
computer if the computer freezes and fails to perform a normal restart.
PLED (System Power LED):
Connect to the power status indicator on the chassis front panel. e LED is on when the
system is operating. e LED keeps blinking when the system is in S1/S3 sleep state. e
LED is o when the system is in S4 sleep state or powered o (S5).
HDLED (Hard Drive Activity LED):
Connect to the hard drive activity LED on the chassis front panel. e LED is on when the
hard drive is reading or writing data.
e front panel design may dier by chassis. A front panel module mainly consists of power
switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connect-
ing your chassis front panel module to this header, make sure the wire assignments and the
pin assignments are matched correctly.
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.
1
PLE D+
PLE D+
PLE D-
22
English
Serial ATA3 Connectors
(SATA_0:
see p.1, No. 5)
(SATA_1:
see p.1, No. 2)
ese two SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
SATA Power Connector
(SATA_POW1)
(see p.1, No. 7)
Please connect a SATA
power cable.
USB 2.0 Headers
(9-pin USB2_3)
(see p.1, No. 15)
(9-pin USB4_5)
(see p.1, No. 6)
Besides two USB 2.0 ports
on the I/O panel, there
are two headers on this
motherboard. Each USB
2.0 header can support
two ports.
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.1, No. 19)
is header is for
connecting audio devices
to the front audio panel.
DUMMY
GND GND
P+
P-
P+
P-
USB_PWR U RSB_PW
1
DU MMY
GND
GND
P+
P-
USB_PWR
P+
P-
U RSB_PW
1
J_SE NS E
OUT2_L
1
MIC_RET
PRESENCE#
GN D
OUT2_R
MIC2_R
MIC2_L
OUT_RE
T
1. High Denition Audio supports Jack Sensing, but the panel wire on the chassis must sup-
port HDA to function correctly. Please follow the instructions in our manual and chassis
manual to install your system.
2. If you use an AC’97 audio panel, please install it to the front panel audio header by the
steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to connect
them for the AC’97 audio panel.
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel and
adjust “Recording Volume”.
SATA_1 SATA_0
H81TM-ITX
23
English
Analog Surround
Audio Header
(17-pin HD_AUDIO2)
(see p.1, No. 20)
3W Audio AMP Output
Wafer Header
(4-pin SPEAKER1)
(see p.1, No. 21)
Please connect the chassis
speaker to this header.
SPDIF Out Connector
(2-pin SPDIF_OUT1)
(see p.1, No. 18)
Please connect the SPDIF
Out connector of a HDMI
VGA card to this header
with a cable.
Chassis Fan Connector
(4-pin CHA_FAN1)
(see p.1, No. 3)
Please connect fan cable
to the fan connector and
match the black wire to
the ground pin.
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.1, No. 16)
is motherboard pro-
vides a 4-Pin CPU fan
(Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.
GND
+12V
CHA_FAN _SPEED
FA N_SPEED_CONTROL
GND
1
GN D
+ 12V
FAN_SPEED
FA
N_SPEED_CONTROL
1
2
3
4
12
PIN Signal
Name PIN Signal
Name
18 SENSE 17 KEY
16 LFE 15 A_GND
14 A_GND 13 Center
12 Surr_Rear_R 11 A_GND
10 A_GND 9Surr_Rear_L
8Surr_Side_R 7A_GND
6 5A_GND Surr_Side_L
4 3Front_R A_GND
2 1A_GND Front_L
Front_L+
Front_R-
Front_R+
Front_L-
1
24
English
Consumer Infrared
Module Header
(7-pin CIR1)
(see p.1, No. 4)
is header can be used to
connect the remote controller
receiver.
Serial Port Header
(9-pin COM1)
(see p.1, No. 14)
is COM1 header
supports a serial port
module.
LPC Debug Header
(13-pin LPC1)
(see p.1, No. 24)
Backlight & Amp
Volume Control
Header
(8-pin BLT_VOL1)
(see p.1, No. 13)
1: BKLT_EN
2: BKLT_PWM
3: BKLT_PWR
4: BKLT_PWR
5: GND
6: GND
7: Brightness_Up
8: Brightness_Down
Digital MIC Header
(5-pin DMIC1)
(see p.1, No. 17)
1: +5V
2: No pin
2: SPDIF_OUT/DMIC_
CLK
3: GND
4: DMIC_DATA
5: +3.3V
1
GND
Learn-in
IRTX +5VA
LED
+5VA
CI nputR i
PIN PINSignal Name Signal Name
14 +3V 13 No pin
12 +3V 11 +3V
10 GND 9 GND
8 7LAD3 LAD2
6 5LAD1 LAD0
4 3LFRAME# RESET#
2 1GND CLK
1
1
1
RT
SCTS
GN
D
TX
D
DC
D
DS
R
DT
R
RX
D
1
NC
RI
H81TM-ITX
25
English
Home eater PC
Header
(7-pin HTPC1)
(see p.1, No. 22)
LVDS Panel Connector
(40-pin LVDS1)
(see p.1, No. 11)
1
PIN PINSignal Name Signal Name
8 7HDMI CEC #Power_Button
6 5SMB_DATA 3.3V Standby
4 3SMB_CLK No pin
2 1GND Recording LED
1
40
PIN PINSignal Name Signal Name
1 ODD_Lane3_P 21 NC
2 ODD_Lane3_N 22 EDID_3.3V
3 ODD_Lane2_P 23 LCD_GND
4 ODD_Lane2_N 24 LCD_GND
5 ODD_Lane1_P 25 LCD_GND
6 ODD_Lane1_N 26 ODD_CLK_P
7 ODD_Lane0_P 27 ODD_CLK_N
8 ODD_Lane0_N 28 BKLT_GND
9EVEN_Lane3_
P29 BKLT_GND
10 EVEN_Lane3_
N30 BKLT_GND
11 EVEN_Lane2_
P31 EDID_CLK
12 EVEN_Lane2_
N32 BKLT_ENABLE
13 EVEN_Lane1_
P33 BKLT_PWM_
DIM
14 EVEN_Lane1_
N34 EVEN_CLK_P
15 EVEN_Lane0_
P35 EVEN_CLK_N
16 EVEN_Lane0_
N 36 BKLT_PWR
(12V/19V)
17 EDID_GND 37 BKLT_PWR
(12V/19V)
18 LCD_VCC
(3.3V/5V/12V) 38 BKLT_PWR
(12V/19V)
19 LCD_VCC
(3.3V/5V/12V) 39 NC
20 LCD_VCC
(3.3V/5V/12V) 40 EDID_DATA
26
Deutsch
1 Einleitung
Vielen Dank, dass Sie sich für das H81TM-ITX von ASRock entschieden haben – ein
zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von
ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design,
das ASRocks Streben nach Qualität und Beständigkeit erfüllt.
1.1 Lieferumfang
• ASRock H81TM-ITX-Motherboard (in Mini-ITX-Formfaktor)
• ASRock H81TM-ITX-Schnellinstallationsanleitung
• ASRock H81TM-ITX-Support-CD
• 2 x Serial-ATA- (SATA) Datenkabel (optional)
• 1 x SATA-1:1-Netzkabel (optional)
• 2 x E/A-Blendenabschirmung
• 1 x Schraube für WLAN-Modul
Da die technischen Daten des Motherboards sowie die BIOS-Soware aktualisiert werden
können, kann der Inhalt dieser Dokumentation ohne Ankündigung geändert werden.
Falls diese Dokumentation irgendwelchen Änderungen unterliegt, wird die aktualisierte
Version ohne weitere Hinweise auf der ASRock-Webseite zur Verfügung gestellt. Sollten
Sie technische Hilfe in Bezug auf dieses Motherboard benötigen, erhalten Sie auf unserer
Webseite spezischen Informationen über das von Ihnen verwendete Modell. Auch nden
Sie eine aktuelle Liste unterstützter VGA-Karten und Prozessoren auf der ASRock-
Webseite: ASRock-Webseite http://www.asrock.com.
30
Deutsch
Betriebssystem
• Unterstützt Microso® Windows® 8.1 32-Bit / 8.1 64-Bit / 8 32-
Bit / 8 64-Bit / 7 32-Bit / 7 64-Bit
Zertizierungen
• FCC, CE, WHQL
• ErP/EuP ready (ErP/EuP ready-Netzteil erforderlich)
* Detaillierte Produktinformationen nden Sie auf unserer Webseite: http://www.asrock.com
Aufgrund von Beschränkungen kann die Größe des tatsächlich für die Systemnutzung
reservierten Speichers unter Windows®-Betriebssystemen mit 32 Bit weniger als 4 GB
betragen. Windows®-Betriebssysteme mit 64 Bit haben keine derartigen Beschränkungen.
Mit ASRock XFast RAM können Sie den Speicher einsetzen, den Windows® nicht nutzen
kann.
34
Deutsch
Analoges Surround
Audiosteckleiste
(17-polig, HD_AUDIO2)
(siehe S. 1, Nr. 20)
3-W-Audi o-Amp-Aus-
gang
Wafer-Steckleiste
(4-polig, SPEAKER1)
(siehe S. 1, Nr. 21)
Bitte verbinden Sie den
Gehäuselautsprecher mit
dieser Stileiste.
SPDIF-Ausgang
(2-polig, SPDIF_OUT1)
(siehe S. 1, Nr. 18)
Bitte verbinden Sie den
SPDIF-Ausgangsanschluss
einer HDMI-VGA-Karte
über ein Kabel mit dieser
Stileiste.
Gehäuselüeranschluss
(4-polig, CHA_FAN1)
(siehe S. 1, Nr. 3)
Bitte verbinden Sie das
Lüerkabel mit dem
Lüeranschluss; der
schwarze Draht gehört
zum Erdungskontakt.
CPU-Lüeranschlüsse
(4-polig, CPU_FAN1)
(siehe S. 1, Nr. 16)
Dieses Motherboard
bietet einen 4-poligen
CPU-Lüeranschluss
(lautloser Lüer). Falls
Sie einen 3-poligen CPU-
Lüer anschließen möcht-
en, verbinden Sie ihn bitte
mit Kontakt 1 bis 3.
GND
+12V
CHA_FAN _SPEED
FAN_SPEED_ CONTR OL
GND
1
GN D
+ 12V
FAN_SPEED
FA
N_SPEED_CONTROL
1
2
3
4
12
Pol PolSignalname Signalname
18 17SENSE KEY
16 15LFE A_GND
14 13A_GND Center
12 11Surr_Rear_R A_GND
10 9A_GND Surr_Rear_L
8 7Surr_Side_R A_GND
6 5A_GND Surr_Side_L
4 3Front_R A_GND
2 1A_GND Front_L
Front_L+
Front_R-
Front_R+
Front_L-
1
37
Français
H81TM-ITX
1 Introduction
Nous vous remercions d’avoir acheté cette carte mère ASRock H81TM-ITX, une
carte mère able fabriquée conformément au contrôle de qualité rigoureux et
constant appliqué par ASRock. Elle vous ore de performances élevées associées à
une conception robuste, dignes de lengagement de qualité et de durabilité qui font la
réputation de ASRock.
1.1 Contenu de l’emballage
• Carte mère ASRock H81TM-ITX (facteur de forme in Mini-ITX)
• Guide d’installation rapide ASRock H81TM-ITX
• CD d’assistance ASRock H81TM-ITX
• 2 x câbles de données Serial ATA (SATA) (Optionnel)
• 1 x câbles dalimentation SATA 1 vers 1 (Optionnel)
• 2 x panneau de protection E/S
• 1 x Vis de module Wi-Fi
Les spécications de la carte mère et du logiciel BIOS pouvant être mises à jour, le contenu
de ce document est soumis à modication sans préavis. En cas de modications du
présent document, la version mise à jour sera disponible sur le site Internet ASRock sans
notication préalable. Si vous avez besoin d’une assistance technique pour votre carte
mère, veuillez visiter notre site Internet pour plus de détails sur le modèle que vous utilisez.
La liste la plus récente des cartes VGA et des processeurs pris en charge est également
disponible sur le site Internet de ASRock. Site Internet ASRock http://www.asrock.com.
38
Français
1.2 Spécications
Plateforme • Facteur de forme in Mini-ITX (Compatible avec Mini-ITX)
• Conception à condensateurs solides
Processeur • Prend en charge les processeurs de 4ème Génération Inte
CoreTM i7 / i5 / i3 / Xeon® / Pentium® / Celeron® avec un TDP
max. de 65W et au format LGA1150
• Prend en charge la technologie Intel®
Turbo Boost 2.0
Chipset • Intel®
H81
Mémoire • Technologie mémoire double canal DDR3
• 2 x fentes DDR3 SO-DIM
• Prend en charge les mémoires sans tampon non ECC DDR3
1600/1333/1066
• Capacité max. de la mémoire système : 16Go (voir
AVERTISSEMENT)
• Prend en charge Intel®
Extreme Memory Prole (XMP)1.3/1.2
Fente
d’expansion
• 1 x fente PCI Express 2.0 x4
• 1 x fente mini-PCI Express
Graphiques • La technologie Intel® HD Graphics Built-in Visuals et les sorties
VGA sont uniquement prises en charge par les processeurs
intégrant un contrôleur graphique.
• Prend en charge la technologie Intel® HD Graphics Built-in
Visuals : Intel® Quick Sync Video avec AVC, MVC (S3D) et
MPEG-2 Full HW Encode1, Intel® InTruTM 3D, technologie
Intel® Clear Video HD, Intel® InsiderTM, Intel® HD Graphics
4400/4600
• Pixel Shader 5.0, DirectX 11.1
• Mémoire partagée max. 1792Mo
• Trois options de sortie VGA: HDMI, DVI-I et LVDS
• Prend en charge la conguration à triple moniteurs
• Prend en charge la technologie HDMI avec résolution
maximale de 4K × 2K (4096x2304) @ 24Hz
• Prend en charge le mode DVI-I avec une résolution maximale
de 1920x1200 @ 60Hz
• Prend en charge le mode LVDS avec une résolution maximale
de 1920x1200 @ 60Hz

Produktspecifikationer

Varumärke: Asrock
Kategori: moderkort
Modell: H81TM-ITX

Behöver du hjälp?

Om du behöver hjälp med Asrock H81TM-ITX ställ en fråga nedan och andra användare kommer att svara dig