ATen 2X-019G Bruksanvisning

Läs nedan 📖 manual på svenska för ATen 2X-019G (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
Side Panel Double Mount Kit
Step 1: Hold the two PDUs side by side so that the
bottom is flush and align the brackets with the holes
on each PDU.
Installation:
Bracket Mount Rack Mount
Follow the instructions below to secure two PDUs
together and mount them to a rack.
Step 2: Screw the brackets to the PDUs to secure
them together at each end, and then install two
buttons at each end of the PDUs, as show above.
2 x Brackets
4 x Buttons
4 x Phillips Screws
12 x Hexagon Screws
Step 1: Align the 4 buttons with 4 slots on the rack,
insert and let the PDUs slide down and secure into
place on the rack.

Produktspecifikationer

Varumärke: ATen
Kategori: Inte kategoriserad
Modell: 2X-019G

Behöver du hjälp?

Om du behöver hjälp med ATen 2X-019G ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad ATen Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer