ATen VE-RMK2U Bruksanvisning

Läs gratis den bruksanvisning för ATen VE-RMK2U (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 5.5 recensioner. Har du en fråga om ATen VE-RMK2U eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Video Extender Rack Mount Kit
VE-RMK2U
Installation:
1. (A) Position the VE-RMK2U Frame on the front of the rack and align the holes in the mounting brack-
ets with the holes in the rack, then screw the mounting brackets to the rack. Rack screws are not
provided. (B) Remove the two screws to detach the center brace.
AB
2. Place the video extender on the 2U Mounting Plate and align the holes, then screw the video extender
to the mounting plate.
Package Contents:
User Instructions
1 x VE-RMK2U Frame
12 x 2U Mounting Plates
26 x Plastic Captive Screws
36 x Countersunk Head Screws
Front
Rear
M3X5 Countersunk
Head Screws
The VE-RMK2U kit provides a mounting frame and accessories to install
12 ATEN Video Extenders in 2U of rack space. Compatible with ATEN
models VE800A, VE803, VE810, VE600A, VE602, VE560, and CE100.
Video Extender Rack Mount Kit
VE-RMK2U
5. Slide a 2U Mounting Plate with video extender attached onto a slot in the VE-RMK2U Frame, align-
ing the screw holes and fitting the notches. Secure the mounting plate to the frame with two Plastic
Captive Screws. Repeat the process with each video extender you are installing.
User Instructions
Plastic Captive
Screws
4. A complete installation with 12 ATEN video extenders will look like the image below.

Produktspecifikationer

Varumärke: ATen
Kategori: Inte kategoriserad
Modell: VE-RMK2U

Behöver du hjälp?

Om du behöver hjälp med ATen VE-RMK2U ställ en fråga nedan och andra användare kommer att svara dig