Atlona AT-VGW-HW Bruksanvisning
Atlona
Kontroller
AT-VGW-HW
Läs gratis den bruksanvisning för Atlona AT-VGW-HW (8 sidor) i kategorin Kontroller. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 7.5 recensioner. Har du en fråga om Atlona AT-VGW-HW eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
Installation Guide
AT-VGW-HW-3 and AT-VGW-HW-10
1
Velocity Gateway
AT-VGW-HW-3 and AT-VGW-HW-10
The Atlona AT-VGW-HW-3 and AT-VGW-HW-10 are Atlona Velocity™ System server gateways
for AV system control, plus room scheduling and AV asset management. These gateways feature
a compact enclosure that easily installs into a rack. With a simple network connection and web
browser access, an integrator, tech manager, or technician can quickly begin conguration and
deployment of AV control systems, room scheduling touch panels, and AV devices such as
matrix switchers. Velocity VGW-HW server gateways support industry-standard, secure data
communications, and feature dual Gigabit Ethernet ports for isolating an AV device LAN from
a facility or corporate network. An innovative, network-based system architecture allows full
redundancy and failover with two gateways in operation, maximizing AV system reliability while
preventing downtime in mission-critical applications.
1 x AT-VGW-HW-3 or
AT-VGW-HW-10
2 x Mounting plate
4 x Mounting screw
1 x Long rack ear
1 x Short rack ear
1 x Installation Guide
Package Contents
Installation Guide
AT-VGW-HW-3 and AT-VGW-HW-10
2
USBUSBUSB
ETHERNETHDMI OUTMDP OUT DC 19V
1 2
AT-VGW-250
GATEWAY
USB USB-C AUDIO OUT
T M
VELOCITY
1 USB
These ports are for future features and are
not usable at this time.
2 USB-C
This port is for future features and is not
usable at this time.
3 AUDIO OUT
Future feature port, not usable at this time.
4 MDP OUT
Connect to a DisplayPort monitor to view
device information, such as IP address.
5 HDMI OUT
Connect to an HDMI monitor or display
to view device information, such as IP
address.
6 ETHERNET
Connect an Ethernet cable from this port
to the same network as the controlled
devices.
7 DC 19V
Connect the included 19V power supply
to this port for power.
Panel Descriptions 1 2 3
4 5 6 7
Installation Guide
AT-VGW-HW-3 and AT-VGW-HW-10
3
Mounting Instructions
The AT-VGW-HW can be mounted in dierent ways, based on the number of units that are being
installed. The AT-VGW-HW may also be mounted in a rack or on/under any at surface.
Single-unit rack installation
1 Attach the included small rack ear to one side of the AT-VGW-HW, using the included
screws.
2 Attach the included longer rack ear to the opposite side of the AT-VGW-HW using the
included screws.
USB
USB
USB
USB USB-C AUDIO O UT
TM
V
ELOCITY
Dual-unit rack installation
1 Turn both units upside-down on a at surface, next to each other, as shown.
2 Position the included mounting plate over the pre-drilled holes on the bottom of the
enclosure. When attaching the mounting plate, the countersink bevels on the mounting
plate should face upward.
USB
USB-C AUDIO OUT
USB
USB
USB
USB USB-C AUDIO OUT
TM
V
ELOCIT Y
Countersink bevel
Produktspecifikationer
| Varumärke: | Atlona |
| Kategori: | Kontroller |
| Modell: | AT-VGW-HW |
Behöver du hjälp?
Om du behöver hjälp med Atlona AT-VGW-HW ställ en fråga nedan och andra användare kommer att svara dig
Kontroller Atlona Manualer
10 September 2024
10 September 2024
10 September 2024
Kontroller Manualer
- Kicker
- MuxLab
- Axor
- Gioteck
- Saitek
- Toa
- Monster
- Schneider
- Behringer
- Big Ben
- Blizzard Lighting
- KanexPro
- Key Digital
- Leviton
- Synology
Nyaste Kontroller Manualer
2 April 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
28 Mars 2025
27 Mars 2025
26 Mars 2025
2 Mars 2025