Audac HS208T Bruksanvisning

Audac högtalare HS208T

Läs gratis den bruksanvisning för Audac HS208T (12 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 10.5 recensioner. Har du en fråga om Audac HS208T eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/12
HS208(T)MK2
User & Installation
Manual
www.audac.eu
2
3
Introduction
Full range horn speaker 8
The HS2xx series are 2-way horn loaded loudspeakers which are specifically engineered
to provide a long-throw, full-range sound projection in a wide variety of in- and outdoor
applications.
The HS208MK2 is the 8” model of the HS2xx family consisting of a 8” high-output
woofer and a compression driver with 1.3” voice coil. The compression driver is equipped
with an overload protection and is fitted with a 40° x 40° coverage horn which is coaxially
constructed as one entity with the loudspeaker’s enclosure.
Thanks to the selection of complementary high-quality components which are carefully
matched, the HS208MK2 delivers a wide range, smooth frequency response with a
high efficiency. This ensures an extraordinary clarity of speech and extended frequency
response for music with an RMS power of 150 Watt, up to a maximum power of 300
Watt. The frequency range (-10 dB) starts from 70 Hz up to 20 kHz and the sensitivity
(1W / 1m) reaches 97 dB, while a maximum continuous sound pressure level of 123 dB
can be achieved.
The enclosure is constructed out of multi-layer glass composite material with a durable
scratch resistant EPDM coating. The aluminium front grill is lined with an acoustical
transparent and water eliminating backing.
Two different models are available for low impedance use (HS208MK2) and 100V use
(HS208TMK2). The HS208MK2 is fitted with two heavy-duty SpeakON connectors
with waterproof gaskets which ensures a reliable connection with easy link-through to
other speakers. The HS208TMK2 is fitted with a waterproof connection box containing
a multi-tapping barrier terminal block enabling the selection of different line transformer
power tappings while providing easy link-through to other speakers. This makes the
speakers suitable for outdoor use.
An optional mounting bracket provides a complete solution for installation of the system.
4
Precautions
READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY
ALWAYS KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. NEVER
THROW THEM AWAY
ALWAYS HANDLE THIS UNIT WITH CARE
HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS
DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS
OR OTHER APPARATUS THAT PRODUCE HEAT
ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE
MANUFACTURER.
ONLY INSTALL THE SPEAKER IN LOCATIONS THAT CAN STRUCTURALLY
SUPPORT THE WEIGHT OF THE SPEAKER. IGNORING THIS CAN BRING THE
SPEAKER DOWN.
DO NOT USE ANY OTHER METHOD THAN SPECIFIED TO MOUNT THE
SPEAKER. IF EXTREME FORCE IS APPLIED TO THE SPEAKER, IT COULD FALL
DOWN
ATTACH A SAFETY WIRE TO THE SPEAKER WHEN IT IS MOUNTED HIGH UP.
ONLY USE INDUSTRY-ACCEPTED RIGGING TOOLS AND METHODS
CAREFULLY CHECK THE UNIT’S CONDITION AFTER UNPACKING.
IF THERE IS ANY DAMAGE TO THE CARTON BOX OR THE UNIT ITSELF,
INFORM YOUR VENDOR IMMEDIATELY.
ALWAYS FOLLOW THE LOCAL REGULATIONS AND REQUIREMENTS
REGARDING INSTALLATION, SUSPENSION AND CONNECTION OF THIS
LOUDSPEAKER. EVEN WHEN OTHERWISE SPECIFIED IN THIS DOCUMENT.
THE INSTALLATION OF THIS LOUDSPEAKER SHALL BE DONE BY QUALIFIED
PERSONNEL ONLY.
5
CAUTION
USE CABLES OF THE RIGHT GAUGE TO CONNECT THE LOUDSPEAKER
USE CABLES WITH CLEAR COLOUR CODING INDICATING THE POLARITY AND
MAINTAIN THE SAME POLARITY THROUGHOUT THE WHOLE SYSTEM.
ONLY USE THE CORRECT AMPLIFIER OUTPUT VOLTAGE AND IMPEDANCE.
EXCEEDING THESE LIMITS COULD CAUSE FIRE OR OTHER FAILURES.
AVOID EXPLOSIONS: DO NOT USE THE SPEAKER AROUND GASOLINE,
THINNER OR OTHER COMBUSTIBLES
AVOID ELECTRIC SHOCKS: SWITCH OFF THE AMPLIFIER WHEN CONNECTING
THE LOUDSPEAKER
DO NOT USE THE LOUDSPEAKER FOR AN EXTENDED PERIOD OF TIME AT
DISTORTED SOUND. THIS COULD CAUSE PERMANENT DAMAGE.
CAUTION - SERVICING
This product contains no user serviceable parts. Refer all servicing
to qualified service personnel. Do not perform any servicing
(unless you are qualified to do so.)
EC DECLARATION OF CONFORMITY
This product conforms to all the essential requirements and further
relevant specifications described in following directives: 2014/30/
EU (EMC) and 2014/35/EU (LVD)
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
The WEEE marking indicates that this product should not be
disposed with regular houshold waste at the end of its product
life. This regulation is created to protect both the environment
and human health.
This product is developed and manufactured with high quality
materials and components which can be recycled and/or reused.
Please dispose this product to your local collection point or
recycling centre for electrical and electronic waste. This will
make to sure that it will be recycled on an environmentally friendly
manner, and will help to protect the environment in which we all
live.
6
Installing the HS208(T)MK2
Mounting
An optionally available U-shaped mounting bracket (MBK208Z) allows safe and secure
installation for the HS208(T)MK2 speakers. It is recommended to use this mounting
bracket for installation of the loudspeakers. If the application requires any other specific
mounting method which is not possible using this accessory, make sure the used
installation method is sufficient strong and the surface whereto the speaker is installed
can support the speakers weight. Always make sure the speaker is secured through an
additional drop safety.
The below drawing shows an explode view how to assemble the mounting bracket to
the speaker.


Produktspecifikationer

Varumärke: Audac
Kategori: högtalare
Modell: HS208T

Behöver du hjälp?

Om du behöver hjälp med Audac HS208T ställ en fråga nedan och andra användare kommer att svara dig