Aurora AU3652 Bruksanvisning

Aurora Mixer AU3652

Läs gratis den bruksanvisning för Aurora AU3652 (9 sidor) i kategorin Mixer. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om Aurora AU3652 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/9

AU 3652

ONLY FOR HOUSEHOLD USE

ww w.aurora-tm.eu

www.aurora-ua.com

Hand Blender

Electric

Opis obwodu

instrument

1. Tryb High-speed “On”

2. Tryb High-speed “Turbo”

3. Blok silnika

4. Dysza-Blender

Components

identication

1. Speed mode “On”

2. Speed mode “Turbo”

3. Motor block

4. Nozzle-blender

Grandinės aprašymas

instrumentas

1. Didelės spartos režimu “On”

2. Didelės spartos režimu “Turbo”

3. Variklio blokas

4. Purkštukas maišiklis

Circuit description

instruments

1. Ātrgaitas režīms “On”

2. Ātrgaitas režīms “Turbo”

3. Motor bloks

4. Sprausla-blender

Circuit kirjeldus

instrument

1. Kiire režiim “On”

2. Kiire režiim “Turbo”

3. Motor plokk

4. Otsik-mikserisse

Описание схемы

прибора

1. Швидкісний режим “On”

2. Швидкісний режим “Turbo”

3. Моторний блок

4. Насадка-блендер

Опис схеми

приладу

1. Скоростной режим “On”

2. Скоростной режим “Turbo”

3. Моторный блок

4. Насадка-блендер

SPECIFICATIONS

CONTENT \ СОДЕРЖАНИЕ \ ЗМІСТ \ ZAWARTOŚĆ \ TURINYS \ SATURS \ SISU

COMPONENTS IDENTIFICATION \ ОПИСАНИЕ \ ОПИС \ OPIS \ APRAŠYMAS \ APRAKSTS \ KIRJELDUS

ENGLISH

РУССКИЙ

УКРАЇНСЬКА

POLSKI

LIETUVOS

LATVIJAS

EESTI KEEL

Power source 220-240V ~50Hz

DC motor 300 W

Max. power 500 Ватт

ENG

Please read this manual carefully before using the product to avoid dam-

age during use. Before switching on the product, make sure that the tech-

nical specications of the product shown on the label correspond to the

parameters of the electric network. Incorrect use can lead to damage of the

product, cause material damage or cause damage to the health of the user.

Use only for household purposes in accordance with this Manual. The prod-

uct is not intended for commercial use. Use the product only for its intend-

ed purpose. Do not use the product near the kitchen sink, outdoors and in

rooms with high humidity. Always unplug the product from the electrical

network when it is not in use, as well as before assembly, disassembly and

cleaning. The product must not be unattended while it is connected to the

electric network. Make sure that the power cord does not touch the sharp

edges of furniture and hot surfaces. To avoid electric shock, do not attempt

to disassemble or repair the product by yourself. When disconnecting the

product from the electric network, do not pull on the power cord, hold the

plug. Do not twist or wind the cord. The product is not designed to be oper-

ated by an external timer or a separate remote control system. The product

is not intended for use by persons with reduced physical, sensory or mental

abilities, or if they have no experience or knowledge, if they are not con-

trolled or instructed about the use of the device by the person responsible

for their safety Do not allow children to use the product as a toy. Do not use

accessories that are not included in the delivery suite.

ATTENTION! Do not allow children to play with plastic bags or wrapping film.

THREAT OF SUFFOCATION! ATTENTION! Do not use this product outdoors.

ATTENTION! Be especially careful if children under 8 years or people with

disabilities are close to the product in use.

ATTENTION! Do not use this product near combustible materials, explo-

sives, or self-igniting gases. Do not install this product near a gas or electric

stove, or other heat sources. Do not expose the product to direct sunlight.

ATTENTION! Do not allow children under 8 years to touch the kettle body,

the power cord and the plug of the power cord while the product is in opera-

tion. If the product has been kept for a while at a temperature below 0ºC, it

must be left at room temperature for at least 2 hours before switching it on.

When connecting the product to an electrical network do not use an adapter.

ATTENTION! To avoid overloading the electric network, do not connect the

product with other powerful electrical appliances to the same electric network.

ATTENTION! The maximum temperature of the products for processing

should not exceed 40 ° C.

ATTENTION! To avoid overheating, do not use the product for more than

30 seconds, and always take a break for at least 2 minutes.

ATTENTION! If it is dicult to rotate the knife-shredder, disconnect the

appliance from the mains and only after that it is possible to extract the

ingredients that interfere with the rotation of the knife.

ATTENTION! The operating time in “Turbo” mode should not exceed 15 seconds.

ATTENTION! Do not touch the motor housing, the power cord, or the

power plug with wet hands. At the end of work, before removing the food

and attachment from the bowl, disconnect the motor unit from the mains

and wait until the motor stops completely. To avoid electric shock and re,

do not immerse the motor and power cord in water or other liquids and do

not wash the motor part under running water. If this happens, immediately

unplug the product from the mains and, before using it in the future, check

the operation and safety of the product in an authorized service center.

ATTENTION! Do not remove the nozzles during operation. In order not to

damage the blades, do not process very hard foods such as cereals, rice,

seasonings, coffee beans, ice, hard cheeses, frozen foods. If working with the

nozzle is difficult, add a small amount of water. Before starting the grinding

/ mixing process, it is recommended to peel the fruit from the peel, remove

inedible parts, bones, and cut the products in cubes about 1.5x1.5 cm in size.

ATTENTION! Cutting blades are very sharp and are dangerous. Handle

them with extreme caution!

ATTENTION! Do not touch the rotating parts of the product.

SECURITY MEASURES

Unpack the product and remove any packing material. Wipe the case and all accessories carefully with a soft, slightly damp cloth. After that, wipe them dry.

PREPARATION FOR WORK

NOZZLE-BLENDER

The blender nozzle is suitable for making soups, mashed potatoes, various

sauces and gravy, as well as baby food, mixing various cocktails. Install the

nozzle in the engine block and secure it. Make sure that the product is as-

sembled properly. Connect the motor unit to the mains. To avoid splashing

the mixture, before immersion, immerse the nozzle in products that need

to be processed. To turn on the device, press and hold the “On” Button. This

mode of operation is suitable for mixing liquid products. When you press and

hold the button, the product will operate at “II speed. This mode of operation

is suitable for the joint treatment of liquid and solid products.

WORK

Before cleaning, disconnect the product from the mains. Make sure the motor is fully stopped. To clean the engine block, use a slightly damp

cloth, then wipe it dry. Wash all nozzles and containers with warm soapy water, then wipe dry with a clean towel. Do not soak the nozzles

for long in the water. Do not use the dishwasher to clean the attachments. Do not use hard jaws, abrasive cleaners or solvents for cleaning.

CLEANING AND MAINTENANCE

Before storage, make sure that the product is disconnected from electric network. Complete all the requirements of the CLEANING AND

MAINTENANCE section. Keep the product in a dry, cool place and out of the reach of children

STORAGE

This symbol on the product and packaging means that used electrical and electronic products, as well as batteries, should not be disposed of with household waste. They need

to be taken to specialized reception points. For more information on existing waste collection systems, contact your local authorities. Correct disposal will help to save valuable