AXESS AXLOC-150A Bruksanvisning


Läs gratis den bruksanvisning för AXESS AXLOC-150A (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8 recensioner. Har du en fråga om AXESS AXLOC-150A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
AXLOC-150A
INSTALL ATION I N STRUCTION S
REV. 12/18/19
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
Wire Color & Function: The audio and power input wire colors are an EIA standard for
car stereo applications as follows.
Note: Be sure that all audio input connections are polarized or in phase with each other.
corresponding positive input wires of the AXLOC-150A. The same goes for the negative
audio wires. Failure to do this will result in poor bass response and low quality audio.
Adjusting the AXLOC-150A for maximum performance:
After completing all of the necessary connections, turn the AXLOC-150A adjustment pots all of the
way down by rotating them completely counter-clockwise. Now, turn the stereo system on and
adjust the main volume control on the stereo to approximately 3/4 maximum volume. Select
one of the adjustment pots on the AXLOC-150A and turn it slowly clockwise until you notice audio
distortion and then stop. Turn the remaining pot to the same position as the previously adjusted
pot. The audio set-up of the AXLOC-150A is now complete and ready to be enjoyed.
INPUT HARNESS
White = LEFT Front (+) Input
White/Black = LEFT Front (-) Input
Black = Reference Ground (-)
(Reference ground optional if noise is present)
Gray = RIGHT Front (+) Input
Gray/Black = RIGHT Front (-) Input


Produktspecifikationer

Varumärke: AXESS
Kategori: Inte kategoriserad
Modell: AXLOC-150A

Behöver du hjälp?

Om du behöver hjälp med AXESS AXLOC-150A ställ en fråga nedan och andra användare kommer att svara dig