AXESS AXLOCM-150 Bruksanvisning

Läs gratis den bruksanvisning för AXESS AXLOCM-150 (3 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 5 recensioner. Har du en fråga om AXESS AXLOCM-150 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

AXLOCM-150

INSTALLATION INSTRUCTIONS

REV. 12/13/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.com

The Line Output Converter (LOC) should be installed on a stereo’s speaker output wires or the output

wires on an OEM amplifier of up to 75 watts per channel. These wires can be found behind the stereo

in the dash, on the outside of an OEM amplifier, or on the input terminals on the OEM speakers.

Wire color and function

The audio input wire colors are an EIA standard for car stereo applications as follows:

YellowBattery +12v input

BlackGround input

BlueRemote +12v output the above power wires can be connected directly

to the amplifier being added

WhiteLeft front (+) input

White/BlackLeft front (-) input

GrayRight front (+) input

Gray/Black Right front (-) input

Black/WhiteReference ground (-) (reference ground optional if noise is present)

Note: Be sure that all audio input connections are polarized or in phase with each other. That is, the

positive output wires from the audio source need to be connected to the corresponding positive

input wires of the LOC. The same goes for the negative audio wires. Failure to do this will result in

poor bass response and low quality audio.

Continued on other side

2 Channel Line Output Converter (LOC) with Amp Turn-On

Produktspecifikationer