Axxess AX-PS Bruksanvisning
Axxess
ej kategoriserat
AX-PS
Läs gratis den bruksanvisning för Axxess AX-PS (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2.5 recensioner. Har du en fråga om Axxess AX-PS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
AX-PS
AX-PS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/06/25 INSTAX-PS
AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/06/25 INSTAX-PS
AX-PS
A
B
-
+
A
B
AX-PS
A
B
-
+
AX-PS
A
B
-
+
A
B
AX-PS
A
B
-
+
INTERFACE COMPONENTS
• AX-PS Timer with wiring harness
INTERFACE COMPONENTS
• AX-PS Timer with wiring harness
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape
• Wire cutter
• Zip-ties
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape
• Wire cutter
• Zip-ties
Universal-Amp Turn On/Off Timer
Universal-Amp Turn On/Off Timer
SETUP/SETTINGS
(Timer settings 0-30 seconds*)
*Turn-On Delay
•
Press left button (A) to enter the Turn-On delay setting,
the Red LED flashes.
•
Press left (A) and right (B) button to set up the delay, up to 30 seconds. If there is
no action for 3 seconds, it will return to display mode.
*Turn-Off Delay
• Press right button (B) to enter into Turn-Off Delay setting, the Green LED flashes.
• Press left
(A)
and right (B) button to set up the delay up to 30 seconds. If there is
no action for 3 seconds, it will return to display mode.
Note: Display will turn off after 3 minutes on inactivity. To turn on the display press
either the A or B button
SETUP/SETTINGS
(Timer settings 0-30 seconds*)
*Turn-On Delay
•
Press left button (A) to enter the Turn-On delay setting,
the Red LED flashes.
•
Press left (A) and right (B) button to set up the delay, up to 30 seconds. If there is
no action for 3 seconds, it will return to display mode.
*Turn-Off Delay
• Press right button (B) to enter into Turn-Off Delay setting, the Green LED flashes.
• Press left
(A)
and right (B) button to set up the delay up to 30 seconds. If there is
no action for 3 seconds, it will return to display mode.
Note: Display will turn off after 3 minutes on inactivity. To turn on the display press
either the A or B button
Blue: Remote turn on output
Red: Remote turn on input
Yellow: 12v Constant
Black: Ground
Blue: Remote turn on output
Red: Remote turn on input
Yellow: 12v Constant
Black: Ground
SPECIFICATIONS
• Programmable amplifier turn
on/off pop eliminator
• Programmable turn on/off
delay up to 30 seconds
• Working Voltage from 10 volts
to 16 volts
• Trigger output current: 500mA
• Trigger input current: 1mA
• 4-wire installation
SPECIFICATIONS
• Programmable amplifier turn
on/off pop eliminator
• Programmable turn on/off
delay up to 30 seconds
• Working Voltage from 10 volts
to 16 volts
• Trigger output current: 500mA
• Trigger input current: 1mA
• 4-wire installation
TURN-ON DELAY (RED LED)
TURN-ON DELAY (RED LED)
TURN-OFF DELAY (GREEN LED)
TURN-OFF DELAY (GREEN LED)
Produktspecifikationer
| Varumärke: | Axxess |
| Kategori: | ej kategoriserat |
| Modell: | AX-PS |
Behöver du hjälp?
Om du behöver hjälp med Axxess AX-PS ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Axxess Manualer
9 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
ej kategoriserat Manualer
- AXESS
- Everpure
- Power Soak
- Avid
- Stratco
- 4ms
- Volcano
- Studio Technologies
- Navitel
- Suunto
- Olight
- Cosylife
- Benchmark
- Bender
- Telestar
Nyaste ej kategoriserat Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025