Axxess AXABH-HN1 Bruksanvisning


Läs gratis den bruksanvisning för Axxess AXABH-HN1 (4 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 2.5 recensioner. Har du en fråga om Axxess AXABH-HN1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
AXABH-HN1
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/30/20 INSTAXABH-HN1
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip ties
TABLE OF CONTENTS
Amplifier locations ................................................2
Connections ............................................................3
Honda Amplifier Bypass Harness 2016-Up
• Amplifier bypass harness
• Vehicle-specific harness to bypass the factory amplifier
• Allows loose wires to wire to an aftermarket amplifier
• Saves the installer unnecessary labor and wire
APPLICATIONS
Honda
Accord 2018-Up
Civic 2016-2018
CR-V 2017-2018
Insight 2019-Up
Pilot 2016-2018
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications
FEATURES


Produktspecifikationer

Varumärke: Axxess
Kategori: ej kategoriserat
Modell: AXABH-HN1

Behöver du hjälp?

Om du behöver hjälp med Axxess AXABH-HN1 ställ en fråga nedan och andra användare kommer att svara dig